logo

Advanced Materials technologies to QUADRUPLE the Concentrated Solar Thermal current POWER GENERATION

Sector: Solar • Location: Spain, Germany, Italy, France

Source: EU Funding & Tenders Portal

Project
Ended

The benefits of high efficiency concentrated solar power (CSP) and photovoltaic (PV) are well known: environmental protection, economic growth, job creation, energy security. Those technologies can only be applied properly in regions with annual mean radiation values higher than 1750 kWh/m2 per year. CSP has advantages in front of PV: possible 24h continuous electricity production, electricity and

Project Information FAQ

Project Information

3 Q
The project “Advanced Materials technologies to QUADRUPLE the Concentrated Solar Thermal current POWER GENERATION” is an infrastructure initiative in the Solar sector, located in Spain, Germany, Italy, France. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Want to explore the full details? View the full report

Participants

Sponsoring Agency

Obfuscated Data

Company

Obfuscated Data

Status

Original status

ended

Taiyo status

Obfuscated Data

Taiyo last update

00-00-0000

Available timestamps

00-00-0000

Available timestamp type

Obfuscated Data

Contact

Contact name

Obfuscated Data

Phone

0000000000

Email

ObfuscatedData@email.com

Address

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Description

Description

The benefits of high efficiency concentrated solar power (CSP) and photovoltaic (PV) are well known: environmental protection, economic growth, job creation, energy security. Those technologies can only be applied properly in regions with annual mean radiation values higher than 1750 kWh/m2 per year. CSP has advantages in front of PV: possible 24h continuous electricity production, electricity and heat generation, heat for distributed in cogeneration plants. Within CSP, four technologies have been currently developed: parabolic trough collector (PTC), tower solar power, Stirling/ dish collector and linear Fresnel collector with its advance type named compact linear Fresnel collector. In 2015, there is global 4GWe production (96% PTC), almost 3GWe are under construction. However for huge deployment, a reduction of Levelized Cost of Electricity (LCOE) is imperative for industry consolidation, when nowadays is around 0.16 – 0.22 €/KWh depending on the size plant, Direct Normal Irradiance and the legal framework of site installation. CSP main components: solar field for solar to thermal conversion, power block for thermal to electrical conversion, and thermal storage system are the key to reduce LCOE. IN-POWER project will develop High efficiency solar harvesting CSP architectures based on holistic materials and innovative manufacturing process to allow a Innovation effort mainly focus in advanced materials such as High Reflectance Tailored Shape light Free glass mirror, High working temperature absorber in Vacuum Free receiver, optimized Reduced Mass support structure allow upgrading current solar field. IN-POWER reduce environmental impact also by reducing THREE times standard thermal storage systems by novel thermal storage materials; and a amazing reduction FOUR TIMES the required land extension in comparison of current mature PTC power generation with the same thermal power output. IN-POWER solution will bring LCOE below 0.10 €/KWh beyond 2020.

Original sub-sector

Obfuscated

Original Currency

USD

Original budget

000000000000000

Procurement method

Obfuscated Data

Budget

000000000000000

Location

Region

Obfuscated

Country

Obfuscated

State

Obfuscated Data

County

Obfuscated

Location

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Source

Source reliability

High

Data quality score

100%

Source

Obfuscated Data

URL

obfuscated_data,obfuscateddata.com

More Details

Project Type

Obfuscated Data

Article Published Date

Obfuscated Data