Aero AT-3 Basic Trainer and Light Utility Aircraft

closed

The AT-3 is a single engine, two-seat basic trainer and light utility aircraft designed and manufactured in Poland by Aero. Image courtesy of Stahlkocher. The 6.25m long and 7.55m wide Aero AT-3 can operate from unprepared airstrips, dirty airfields and grass runways. Image courtesy of Adrian Pingstone. The avionics suite integrated in the Aero AT-3 includes a Garmin G500 dual screen electronic flight display, GNS 430W navigation or communication equipment, GMA 340 audio panel, GTX 328 Mode S Transponder and Electronic Engine Monitoring MVP-50. Image courtesy of Guillaume Paumier. The AT-3 is a single engine, two-seater basic trainer and light utility aircraft designed and manufactured in Poland by Aero. It is derived from the Pottier P.220S Koala aircraft. It can carry out pilot training and passenger transportation missions. Two versions of the aircraft have been built – a special kit home built variant named the AT-3 SK, and a factory built version, the AT-3 R100. The maiden flight of the AT-3 took place in 1997 and the aircraft entered service in 2002. The aircraft was accredited under the European Aviation Safety Agency (EASA) very light aircraft (VLA) category in January 2005. Six AT-3s were ordered by Aeroclub Air France in 2008. A total of 50 AT-3s have been built until May 2010. Four AT-3s are operational with the Old Sarum Flying School. The AT-3 was designed in compliance with the European Joint Aviation Regulation (JAR-VLA) standards. It has a low wing cantilever monoplane design with a vertical tail fin. The aircraft was designed to be a low cost, low maintenance basic trainer which can operate both day and night under visual flight rules (VFR) conditions. The 6.25m long and 7.55m wide aircraft consumes 16 litres of fuel an hour. It can take-off and land from unprepared airstrips, dirty airfield and grass runways. The AT-3 is an all-metal and semi-stressed skin construction, suitable to withstand the rigours of pilot training. It is constructed with solid rivets of carbon or kevlar composites to for robustness and durability. The rivets are anodized to safeguard the airframe from corrosion and enable the aircraft to operate in all weather conditions. The AT-3 features an all digital glass cockpit equipped with two adjacent ergonomic seats and dual throttle controls for the pilot and a passenger. It is fitted with a large bubble shaped jettisonable glass canopy which opens forward to render clear visibility to the flight crew. A baggage compartment comprising two containers (left and right) is situated behind the cockpit seats. It can accommodate 30kg of payload, of which 20kg is stored in the lockable left container and the remaining in the right container. The avionics suite integrated in the aircraft includes a Garmin G500 dual screen electronic flight display, GNS 430W navigation or communication equipment, GMA 340 audio panel, GTX 328 Mode S Transponder and Electronic Engine Monitoring MVP-50. Other avionics installed are a communication radio, voice over recorder, turn indicator, fuel computer, ELT-406 emergency locater transmitter, moving map display, global positioning system, LED landing and taxi lights. The AT-3 is powered by a single Rotax 912S engine rated at 75kW of output power. The engine is designed and manufactured by BRP Rotax. It is a four-stroke, four-cylinder and horizontally opposed liquid/air cooled engine fitted with electronic dual ignition, 12V DC alternator, mechanical fuel pump, dual carburettors, electric starter, speed reduction gear box, air intake and exhaust system. A three-blade aero-elastic and ground adjustable carbon composite Elprop 3-1-1P propeller is incorporated at the aircraft’s nose section to maximise performance while minimising the noise. The propeller can rotate at the rate of 5,800rpm. The engine weighs around 56.6kg and its displacement is 1,352cm3 (2m3). The AT-3 is fitted with a robust fixed tricycle type landing gear made of steel leaf springs. The landing gear features two main wheels and a single free castoring nose wheel. The aircraft is fitted with two independent hydraulic toe brakes on the main wheels to render ground manoeuvrability with a small turning circle. The AT-3 can climb at the rate of 4.6m/s. The never-exceed and maximum speeds of the aircraft are 236km/h and 220km/h respectively. The cruise speed is 200km/h and the stall speed is 82km/h. The range of the aircraft is 717km and service ceiling is is 4,000m. The take-off and landing distances are 160m and 150m respectively.

High