Analysis, Design, And Manufacturing using Microstructures
Sector: Education • Location: Spain, Israel, Switzerland, France, Austria, South Korea
Source: EU Funding & Tenders Portal
ADAM^2 aims at questioning five decades of traditional paradigms in computer aided design CAD. While the field of CAD has been very successful in the last half a century using boundary representations, the introduction of microstructure into the design-analysis-manufacturing cycle is going to completely revolutionize geometric CAD from the ground up and into the essential volumetric representation
- Status
- Closed
- Sector
- Education, Manufacturing (Industrial)
- Location
- Spain, Israel, Switzerland, France, Austria, South Korea
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Analysis, Design, And Manufacturing using Microstructures
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | ended |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | ADAM^2 aims at questioning five decades of traditional paradigms in computer aided design CAD. While the field of CAD has been very successful in the last half a century using boundary representations, the introduction of microstructure into the design-analysis-manufacturing cycle is going to completely revolutionize geometric CAD from the ground up and into the essential volumetric representations, making an unprecedented leap in the quality of manufactured artefact. The evolution of new manufacturing technologies such as multi-material 3D printers gives rise to new type of objects that may consist of considerably less, yet heterogeneous, material, consequently being porous, lighter and cheaper, while having the very same functionality (e.g. stiffness) as the original object when manufactured from one single solid material. We propose a unified manufacturing pipeline that will focus on all stages involving Analysis, Design, And Manufacturing using Microstructures (ADAM^2). ADAM^2 proposes high-risky interdisciplinary research that will combine user-guided shape modelling using microstructures, followed by validation and structural optimization using physical process simulation, and finalized by physical realizations via additive and hybrid manufacturing and its subsequent validation. The results of this project will lead to scientific-technological development that impacts €2B/year CAD and €24B/year tool manufacturing European markets, and are expected to reduce the exploitation of heavy materials between an order of magnitude to two orders, in volume. |
Location
Country | Spain, Israel, Switzerland, France, Austria, South Korea |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Education, Manufacturing (Industrial) |
Article published date | 2026-02-01 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
