logo

Blackshape Gabriel Trainer Aircraft

Sector: Advanced Electronics • Location: World

Source: Airforce Technology

Project
Closed

Blackshape Gabriel trainer aircraft was developed by Italian aircraft maker Blackshape to serve the increasing needs of both military and civil pilot training. Trainer aircraft Blackshape 850kg 9m 164k 15,000ft Blackshape Gabriel trainer aircraft was developed by Italian aircraft maker Blackshape to serve the increasing needs of both military and civil pilot training. The Bk160 Gabriel aircraft ba

Project Information FAQ

Project Information

3 Q
The project “Blackshape Gabriel Trainer Aircraft” is an infrastructure initiative in the Advanced Electronics sector, located in World. Taiyo aggregates data on it from Airforce Technology.

Want to explore the full details? View the full report

Participants

Sponsoring Agency

Obfuscated Data

Company

Obfuscated Data

Status

Original status

closed

Taiyo status

Obfuscated Data

Taiyo last update

00-00-0000

Available timestamps

00-00-0000

Available timestamp type

Obfuscated Data

Contact

Contact name

Obfuscated Data

Phone

0000000000

Email

ObfuscatedData@email.com

Address

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Description

Description

Blackshape Gabriel trainer aircraft was developed by Italian aircraft maker Blackshape to serve the increasing needs of both military and civil pilot training. Trainer aircraft Blackshape 850kg 9m 164k 15,000ft Blackshape Gabriel trainer aircraft was developed by Italian aircraft maker Blackshape to serve the increasing needs of both military and civil pilot training. The Bk160 Gabriel aircraft base model was launched at the AERO Friedrichshafen trade show held in April 2017, while its upgraded version, designated Gabriel Turboprop (Gabriel-TP), was launched at the Singapore Airshow 2020. Powered by a turboprop engine, the upgraded trainer variant is intended primarily for military pilot training. Blackshape plans to cooperate with aircraft manufacturers in South East Asian countries including Vietnam, Myanmar, Philippines, and Malaysia to provide either knock-down kits or full technology transfer for local production of the Gabriel trainer. The Gabriel trainer aircraft received design organisation approval and the type certificate in CS-VLA (Very Light Aeroplanes) category from the European Aviation Safety Agency (EASA). Blackshape Bk100-Prime ultralight aircraft serves as the basis for the Gabriel trainer aircraft as well as for ISR and optionally-piloted aircraft versions. A total of 58 Blackshape Prime aircraft are currently operational in 18 countries, while its special configurations are in service with military operators. The Gabriel trainer aircraft features aerodynamic fixed-wing design with sporty finishing inspired by the hand-made tailor style. Its design is optimised to reduce maintenance and direct operating costs to flight organisations, while providing advanced level of pilot training. Carbon fibre is used in the construction of the aircraft, making it lighter and stronger. The fuselage is equipped with low-wing configuration with a wing area of 10.31m² and a wing span of 9m. The overall height of the trainer is 2.45m, while the overall length is 7.45m. The aircraft has a maximum take-off weight of 850kg, a useful load of 220kg with the capacity to carry 33kg of baggage on-board. The aircraft is outfitted a variety of safety features, including reliable electrical systems with military-grade wiring, temperatures and fuel capacity sensors, anti-blast fuel tanks, and five-point certified safety seat belts. It is also fitted with a ballistic parachute to provide safe landing of pilots in the event of emergency. The on-board differential braking system is used to steer the aircraft, while the electrically actuated landing gear system provides safe take-off and landing of the aircraft. Gabriel trainer aircraft is equipped with modern glass cockpit with dual flight controls. It accommodates two pilots in tandem configuration. The avionics aboard the trainer include Aspen Avionics’ EFD1000 Pro primary flight display, EFD1000 multi flight display, Garmin GMA340 audio panel, Garmin GTX335R transponder, Garmin GNC255 navigation/communication radios and Garmin GTN650 touchscreen with GPS/ navigation/communication systems. The trainer is also fitted with ACK Technoligies’ emergency locator transmitter, a stall warning system, data recording system, and an optional KLR10 lift reserve indicator. The Gabriel can be armed with external payloads such as laser-guided missiles or camera, allowing for the training of pilots on light-strike or counter-insurgency (COIN) operations. The Blackshape Gabriel trainer aircraft is powered by a Lycoming IO-320-D1B engine which develops 160hp power at 2,700rpm. The engine has a compression ratio of 8.50:1 and drives Hartzell Raptor Series composite propellers arranged in tractor configuration. The power-plant offers a maximum speed of 164k at sea level and can reach altitudes of 15,000ft. The maximum rate of climb is 1,550fpm, while the maximum endurance is 192 minutes. The trainer requires a take-off distance of 250m and the landing ground roll of 190m. The load factor of the aircraft is +4.4/-2g.Equipped with Roll Royce turboprop engine, the Gabriel-TP variant can attain a true airspeed of 200k at sea level. Get industry leading news, data and analysis delivered to your inbox Give your business an edge with our leading industry insights.

Original sub-sector

Obfuscated

Original Currency

USD

Original budget

000000000000000

Procurement method

Obfuscated Data

Budget

000000000000000

Location

Region

Obfuscated

Country

Obfuscated

State

Obfuscated Data

County

Obfuscated

Location

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Source

Source reliability

High

Data quality score

100%

Source

Obfuscated Data

URL

obfuscated_data,obfuscateddata.com

More Details

Project Type

Obfuscated Data

Article Published Date

Obfuscated Data