Charge Guided Low Gain Avalanche Detectors
Forthcoming · Netherlands
Source: EU Funding & Tenders Portal
GainGuide is a novel semiconductor sensor technology that aims to resolve a major limitation of fine-pitch Low-Gain-Avalanche-Detectors (LGAD). Fine-pitch LGAD devices suffer from large no-gain areas, which are areas that see no charge amplification within the silicon (Gain). Compared to state-of-the-art Trench Isolated LGAD (TI-LGAD), which typically have 20-60% no-gain area for 55x55 μm2 pixels,
- Status
- Prospective
- Sector
- Power Generation (CCGT), Nuclear, Advanced Electronics
- Location
- Netherlands
- Updated
- 19 Nov 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Charge Guided Low Gain Avalanche Detectors
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | forthcoming |
Taiyo status | Prospective |
Taiyo last update | 2026-11-19 |
Contact
| Not available for this record. |
Description
Description | GainGuide is a novel semiconductor sensor technology that aims to resolve a major limitation of fine-pitch Low-Gain-Avalanche-Detectors (LGAD). Fine-pitch LGAD devices suffer from large no-gain areas, which are areas that see no charge amplification within the silicon (Gain). Compared to state-of-the-art Trench Isolated LGAD (TI-LGAD), which typically have 20-60% no-gain area for 55x55 μm2 pixels, GainGuide aims to eliminate this no-gain region by guiding the charge to the gain layer. This boosts the development of detectors that combine picosecond time resolution with excellent spatial resolution to enable four-dimensional (4D) tracking capabilities. It builds on the traditional advantages of LGADs such as better signal to noise and lower power requirements while improving the efficiency above 99% and spatial resolution by more than a factor ten. The key concept of GainGuide is to combine standard trench isolation technology found in TI-LGAD with additional doped regions, to guide the charge towards the gain region within the sensor. This results in uniform gain throughout the entire sensor without the need to compromise between minimizing the no-gain region and pixel size. The proposal includes active and passive layers and use existing structures and production methods, leading to lower production and development costs. To achieve these goals we will: perform simulations to determine the optimal doping concentrations, shapes and locations; develop the necessary recipes in close collaboration with semiconductor foundries to produce these sensors; and perform a full characterization of the devices using lasers, radioactive sources and particle accelerators in order to evaluate the performance of the prototype sensors and the potential of this technology for future detectors. |
Location
Country | Netherlands |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Power Generation (CCGT), Nuclear, Advanced Electronics |
Article published date | 2026-11-15 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
