Clean and efficient microCHCP by micro turbine based hybrid systems
Sector: Hydro • Location: Belgium, Germany, Netherlands, Italy, Denmark
Source: EU Funding & Tenders Portal
Fit4Micro aims to develop a hybrid microCHP unit running on sustainable liquid biofuels. Application is foreseen at multi-family houses, and more specifically at remote and/or off-grid locations. The innovative system is based on a double shaft micro gas turbine (mGT) combined with a novel humidification unit. This unique combination leads to very high electrical efficiencies (>40%) as well as a v
- Status
- Under Construction
- Sector
- Hydro, Hydrogen, Solar, Wind, Consumer Products, Biomass, Oil and Gas, Power Generation (CCGT), Electric Vehicles (EVs), Automotive
- Location
- Belgium
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Clean and efficient microCHCP by micro turbine based hybrid systems
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | ongoing |
Taiyo status | Under Construction |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | Fit4Micro aims to develop a hybrid microCHP unit running on sustainable liquid biofuels. Application is foreseen at multi-family houses, and more specifically at remote and/or off-grid locations. The innovative system is based on a double shaft micro gas turbine (mGT) combined with a novel humidification unit. This unique combination leads to very high electrical efficiencies (>40%) as well as a very flexible heat:power ratio. Low emissions are achieved by the application of flameless combustion, and a high GHG emission reduction is obtained by using truly advanced, RED2 compliant biofuel. Use of a mGT as core-unit in Fit4Micro is ideal for domestic usage, as the system has very low noise output and is vibration free. Furthermore, rapid response times and fuel-flexible operation make this the ideal base for a highly efficient hybrid CHP system, resilient to changes in (local) fuel and power markets, empowering the consumers through digital solutions. Furthermore, the Fit4Micro unit will be integrated with a compression heat pump, an innovative adsorption and a solar PV system through the DC power system avoiding transmission losses. A smart control system will be developed to enable optimal performance at all times. Efficient fuel distribution and off-grid operation of Fit4Micro is enabled by using sustainable liquid biofuels. These fuels will be produced from biomass residues and organic waste streams, through fast pyrolysis followed by mild hydro-processing yielding a hydrotreated pyrolysis oil (HPO). In Fit4Micro the objective is to widen the feedstock basis and lower the fuel costs by i) using residues as the primary feedstock, and ii) by limiting hydrogen consumption by application of mild processing conditions. Besides technological development work, the Fit4Micro project includes specific activities on socio-economic and environmental sustainability, public perception, gender dimensions, market aspects, the regulatory framework & policies. |
Location
Country | Belgium |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Hydro, Hydrogen, Solar, Wind, Consumer Products, Biomass, Oil and Gas, Power Generation (CCGT), Electric Vehicles (EVs), Automotive |
Article published date | 2025-11-01 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
