Closing the Loop for the Next Generation of Sustainable Silicon PV Modules
Sector: Geothermal • Location: Norway, Germany, Türkiye, Netherlands, Spain
Source: EU Funding & Tenders Portal
LoopSi develops the next generation of long‑lifetime, fully Ag‑ and In‑free silicon PV modules by integrating non‑destructive recycling, high‑efficiency Ag‑free cell technologies, and repairable module architectures within a unified two‑loop development framework. Modern n‑type Cz wafers used in TOPCon, SelFi TOPCon and TBC cells exhibit high crystalline quality and mechanical robustness, making t
- Status
- Prospective
- Sector
- Geothermal, Hydrogen, Solar, Electric Vehicles (EVs), Manufacturing (Industrial), Automotive, Chemical (Industrial)
- Location
- Norway, Germany, Türkiye, Netherlands, Spain
- Updated
- 19 Nov 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Closing the Loop for the Next Generation of Sustainable Silicon PV Modules
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | forthcoming |
Taiyo status | Prospective |
Taiyo last update | 2026-11-19 |
Contact
| Not available for this record. |
Description
Description | LoopSi develops the next generation of long‑lifetime, fully Ag‑ and In‑free silicon PV modules by integrating non‑destructive recycling, high‑efficiency Ag‑free cell technologies, and repairable module architectures within a unified two‑loop development framework. Modern n‑type Cz wafers used in TOPCon, SelFi TOPCon and TBC cells exhibit high crystalline quality and mechanical robustness, making them suitable for reuse once recovered intact. LoopSi enables this through a modeling‑guided electrochemical–wet‑chemical wafer‑recovery process that selectively removes metallization, dielectric stacks and doped layers while preserving wafer morphology. Silicon fractions unsuitable for wafer reuse are upgraded through chemical–thermal purification to create high‑purity feedstock for circular Ag‑ and In‑free cell fabrication. Ag‑free metallization is advanced through printable Al‑Si and hybrid Al/Cu metallization schemes combined with engineered diffusion‑barrier stacks that suppress Cu/Al interaction with passivating contacts while maintaining low contact resistivity. These approaches are demonstrated on reference and recovered wafers, ensuring compatibility with circular material flows. At module level, LoopSi advances two eco‑designed architectures: an adhesive‑free modular design derived from Biosphere Solar’s deployed ReModule1 and the LIFE concept based on a hermetically sealed, gas‑filled cavity with reversible pressure‑contact interconnections. Both enable manual opening, component replacement and clean end‑of‑life separation. A harmonized reliability framework combining accelerated indoor testing, multi‑climate outdoor exposure and re‑sealability validation establishes long‑term durability and a repeatable repair cycle. Sustainability assessment applies ISO‑compliant LCA and societal‑impact indicators to quantify CRM savings, carbon‑footprint reduction and lifetime extension achieved by the circular Ag‑ and In‑free LoopSi PV system. |
Location
Country | Norway, Germany, Türkiye, Netherlands, Spain |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Geothermal, Hydrogen, Solar, Electric Vehicles (EVs), Manufacturing (Industrial), Automotive, Chemical (Industrial) |
Article published date | 2026-11-15 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
