CRM-free Low Temperature Electrochemical Reduction of CO2 to Methanol
Sector: Aerospace & Defense • Location: Germany, Italy, Belgium, Spain, United Kingdom, Denmark
Source: EU Funding & Tenders Portal
LOTER.CO2M aims to develop advanced, low-cost electro-catalysts and membranes for the direct electrochemical reduction of CO2 to methanol by low temperature CO2-H2O co-electrolysis. The materials will be developed using sustainable, non-toxic and non-critical raw materials. They will be scaled-up, integrated into a gas phase electrochemical reactor, and the process validated for technical and eco
Project Information FAQ
Project Information
Want to explore the full details? View the full report
Participants
Sponsoring Agency | Obfuscated Data |
Company | Obfuscated Data |
Status
Original status | ended |
Taiyo status | Obfuscated Data |
Taiyo last update | 00-00-0000 |
Available timestamps | 00-00-0000 |
Available timestamp type | Obfuscated Data |
Contact
Contact name | Obfuscated Data |
Phone | 0000000000 |
ObfuscatedData@email.com | |
Address | Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data |
Description
Description | LOTER.CO2M aims to develop advanced, low-cost electro-catalysts and membranes for the direct electrochemical reduction of CO2 to methanol by low temperature CO2-H2O co-electrolysis. The materials will be developed using sustainable, non-toxic and non-critical raw materials. They will be scaled-up, integrated into a gas phase electrochemical reactor, and the process validated for technical and economic feasibility under industrially relevant conditions. The produced methanol can be used as a chemical feedstock or for effective chemical storage of renewable energy. The demonstration of the new materials at TRL5 level, and the potential of this technology for market penetration, will be assessed by achieving a target electrochemical performance > 50 A/g at 1.5 V/cell, a CO2 conversion rate > 60%, and a selectivity > 90% towards methanol production with an enthalpy efficiency for the process > 86%. A significant increase in durability under intermittent operation in combination with renewable power sources is also targeted in the project through several stabilization strategies to achieve a degradation rate of < 1%/1000 h at stack level. The developed low-temperature CO2 conversion reactor will offer fast response (frequency > 2-5 Hz) to electrical current fluctuations typical of intermittent power sources and a wide operating range in terms of input power, i.e. from 10% to full power in less than a second. Such aspects are indicative of an excellent dynamic behaviour as necessary to operate with renewable power sources. A life cycle assessment of the CO2 electrolysis system, which will compile information at different levels from materials up to the CO2 electrolysis system including processing resources, will complete the assessment of this technology for large-scale application. Field testing of the co-electrolysis system in an industrial relevant environment will enable to evaluate the commercial competitiveness and the development of a forward exploitation plan. |
Original sub-sector | Obfuscated |
Original Currency | USD |
Original budget | 000000000000000 |
Procurement method | Obfuscated Data |
Budget | 000000000000000 |
Location
Region | Obfuscated |
Country | Obfuscated |
State | Obfuscated Data |
County | Obfuscated |
Location | Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data |
Source
Source reliability | High |
Data quality score | 100% |
Source | Obfuscated Data |
URL | obfuscated_data,obfuscateddata.com |
More Details
Project Type | Obfuscated Data |
Article Published Date | Obfuscated Data |
