logo

Development and application of hybrid joining in lightweight integral aircraft structures

Sector: Aerospace & Defense • Location: Germany, France, Belgium

Source: EU Funding & Tenders Portal

Project
Ended

The main objective of the DAHLIAS project is to optimise hybrid joining (Refill Friction Stir Spot Welding, RFSSW, with an adhesive sealant bond) for application in aircraft structures. RFSSW is a solid-state joining technology especially applicable to lightweight alloys in similar and dissimilar configurations. The process has been successfully applied to difficult-to-weld and non-weldable alloys

Project Information FAQ

Project Information

3 Q
The project “Development and application of hybrid joining in lightweight integral aircraft structures” is an infrastructure initiative in the Aerospace & Defense sector, located in Germany, France, Belgium. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Want to explore the full details? View the full report

Participants

Sponsoring Agency

Obfuscated Data

Company

Obfuscated Data

Status

Original status

ended

Taiyo status

Obfuscated Data

Taiyo last update

00-00-0000

Available timestamps

00-00-0000

Available timestamp type

Obfuscated Data

Contact

Contact name

Obfuscated Data

Phone

0000000000

Email

ObfuscatedData@email.com

Address

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Description

Description

The main objective of the DAHLIAS project is to optimise hybrid joining (Refill Friction Stir Spot Welding, RFSSW, with an adhesive sealant bond) for application in aircraft structures. RFSSW is a solid-state joining technology especially applicable to lightweight alloys in similar and dissimilar configurations. The process has been successfully applied to difficult-to-weld and non-weldable alloys and is considered a potential replacement of mechanical fastening. Overlap joints in aircraft structures require the use of sealants for corrosion protection reasons. Using sealants with an adhesive function would complement the high quality joints produced by RFSSW by not only protecting against corrosion but also contributing to the overall mechanical performance of the structure. To achieve the main goal of this project a work plan consisting of eight work packages has been devised. Two work packages are focused on the RFSSW process development using standard samples with and without adhesive sealant. In parallel the adhesive sealant technology, including surface pre-treatment will be developed. The hybrid joining solution developed in this project will be compared to conventional joining technologies to define its potential. Hybrid joining brings a number of advantages to production and performance of aircraft structures. The change from differential to integral design introduces new challenges in the analysis of mechanical performance. Hence, the damage tolerance behaviour of hybrid joints is also investigated in this project. Quality control methods will be investigated by selecting NDT methods and by process control based on online monitoring of parameters. In the last phase of this project technology demonstrators will be produced to evaluate the capabilities of the proposed technology in actual aircraft structures. The consortium (3 R&D and 2 industrial partners) has the exact fitting, prooven expertise and high excellence. HZG (coordinator) holds key patents.

Original sub-sector

Obfuscated

Original Currency

USD

Original budget

000000000000000

Procurement method

Obfuscated Data

Budget

000000000000000

Location

Region

Obfuscated

Country

Obfuscated

State

Obfuscated Data

County

Obfuscated

Location

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Source

Source reliability

High

Data quality score

100%

Source

Obfuscated Data

URL

obfuscated_data,obfuscateddata.com

More Details

Project Type

Obfuscated Data

Article Published Date

Obfuscated Data