logo

Energy harvesting via wetting/drying cycles with nanoporous electrodes

Sector: Education • Location: Spain, Germany, France, Ukraine, Italy

Source: EU Funding & Tenders Portal

Project
Ended

Huge amounts of energy are wasted as low grade heat during conversion, transportation and end use. While several technologies can convert heat into electricity, none of them is cost-effective for the conversion of low-grade waste heat. EHAWEDRY proposes a radically new concept for converting low grade waste heat into electricity. EHAWEDRY will couple charging/discharging cycles of electrochemical

Project Information FAQ

Project Information

4 Q
The project “Energy harvesting via wetting/drying cycles with nanoporous electrodes” is an infrastructure initiative in the Education sector, located in Spain, Germany, France, Ukraine, Italy. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Want to explore the full details? View the full report

Participants

Sponsoring Agency

Obfuscated Data

Company

Obfuscated Data

Status

Original status

ended

Taiyo status

Obfuscated Data

Taiyo last update

00-00-0000

Available timestamps

00-00-0000

Available timestamp type

Obfuscated Data

Contact

Contact name

Obfuscated Data

Phone

0000000000

Email

ObfuscatedData@email.com

Address

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Description

Description

Huge amounts of energy are wasted as low grade heat during conversion, transportation and end use. While several technologies can convert heat into electricity, none of them is cost-effective for the conversion of low-grade waste heat. EHAWEDRY proposes a radically new concept for converting low grade waste heat into electricity. EHAWEDRY will couple charging/discharging cycles of electrochemical super-capacitors with the drying/wetting of their nanoporous electrodes, exploiting the proportionality of the capacitor capacity to its electrode/electrolyte contact area. Previous attempts to couple charging/discharging cycles with changes in the electrode/electrolyte contact area aimed at harvesting the mechanical energy used to drive the change in the contact area. The power generated by these mechanical energy harvesters is relatively low, mainly because they have to use smooth capacitor plates (electrodes) to avoid generating too large capillary forces counteracting the harvested displacement. EHAWEDRY proposes a paradigm shift from the energy harvesting strategies previously used. Instead of mechanically changing the electrode/electrolyte contact area by displacing smooth electrodes, EHAWEDRY will change the electrode/electrolyte contact area by modifying the electrolyte level within nanoporous electrodes through drying/wetting cycles. The use of nanoporous electrodes will increase by many orders of magnitude the electrode/electrolyte contact area, which will translate into several orders of magnitude larger amounts of harvestable energy per cycle. Via pioneering fundamental research, EHAWEDRY targets the generation of a harvester prototype that reaches a volumetric power densities of the order of 10 kW/m3, comparable to established waste heat recovery technologies such as Rankine cycle engines, but with advantages in terms of cost, design flexibility, scalability and potential for the cost-effective harvesting of low grade waste heat without upgrading.

Original sub-sector

Obfuscated

Original Currency

USD

Original budget

000000000000000

Procurement method

Obfuscated Data

Budget

000000000000000

Location

Region

Obfuscated

Country

Obfuscated

State

Obfuscated Data

County

Obfuscated

Location

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Source

Source reliability

High

Data quality score

100%

Source

Obfuscated Data

URL

obfuscated_data,obfuscateddata.com

More Details

Project Type

Obfuscated Data

Article Published Date

Obfuscated Data