logo
ProjectOpenBP

EXTREN 375 W Second ST

One of 10,000+ projects Taiyo tracks in Massachusetts.

Source: City of Boston

Excavate surrounding soil to eliminate existing window well. Remove obsolete basement vent and close in opening with concrete block and mortar (once mortar is cured to manufacturer specifications) Apply dam-proofing to overlap parent concrete by minimum of 8”. (Dam Proof product to be Tremco – Tremproof 250GC or equal) ? Remove the bottom courses of vinyl siding at the base of the rear wall (near

Status
Prospective
Sector
Road, Steel, Hydro, Cement, Metal, Residential, Commercial, Government, Water Supply and Storage
Location
South Boston, Massachusetts, United States of America
Updated
19 Nov 2026
Source
City of Boston

ConstructChat

Ask ConstructChat about EXTREN 375 W Second ST

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

5 Q
The project “EXTREN 375 W Second ST” is an infrastructure initiative in the Road sector, located in South Boston, Massachusetts, United States of America. Taiyo aggregates data on it from City of Boston.

Participants

Sponsoring Agency

Status

Original status

open

Taiyo status

Prospective

Taiyo last update

2026-11-19

Contact

Not available for this record.

Description

Description

Excavate surrounding soil to eliminate existing window well. Remove obsolete basement vent and close in opening with concrete block and mortar (once mortar is cured to manufacturer specifications) Apply dam-proofing to overlap parent concrete by minimum of 8”. (Dam Proof product to be Tremco – Tremproof 250GC or equal) ? Remove the bottom courses of vinyl siding at the base of the rear wall (near entrance door) and replace. Install continuous 8”(max) band of sheathing and aluminum flashing to seal. Install proper J-Channel termination at bottom of vinyl siding. ? Seal vinyl siding to vertical foundation concrete joint at the second basement leak location (Ref. #3 Sheet A1) with closed cell foam insulation, self-adhered membrane flashing and PVC Trim board. (**All Vinyl siding in like kind (Standard Residential Grade (.44mm) CertainTeed – Monogram - Double 4 Clap or equal). Siding sample to be approved prior to installation. ? Properly install through Wall vent Hood Caps with specified proper flashing detail and seal existing holes in siding (Field Verification Required) ? Seal siding-to-soffit trim joint at the rear second-floor window bump-out, Install drip edge flashing. (Ref. 7 Sheet # A-1) ? Strip in or Replace failed EPDM membrane perimeter flashing. Replace with selfadhered elasto-form EPDM flashing. ? Remove and Replace all vinyl siding at both rising cheek walls and rear wall surrounding asphalt roof. (Standard Residential Grade (.44mm) CertainTeed – Monogram - Double 4 Clap or equal) Docusign Envelope ID: 4EB7B069-61FA-4F13-8707-1E65DDF0AD8F 3 ? Remove perimeter asphalt shingles sufficient to replace roof to wall flashing per detail on Sheet A-2. ? Remove existing gutters and associated downspouts. ? Replace gutters and downspouts with oversized K-style (per detail on Sheet A-3) ? Remove and Replace all facia board where gutters attach to PVC ? Perform a clean sweep of the worksite and dispose of waste offsite ** Bag and live load all construction related debris

Budget

Location

Country

United States of America (USA)

State

Massachusetts

City

South Boston

Source

Source

City of Boston

URL

More Details

Record type

Project

Sector

Road, Steel, Hydro, Cement, Metal, Residential, Commercial, Government, Water Supply and Storage

Article published date

2025-08-28

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project