logo

From fiber to wall: PHYSical approach of hygrothermal transfers in BIO-based construction MATerials

Sector: Water Supply and Storage • Location: France

Source: EU Funding & Tenders Portal

Project
Ongoing

Bio-based construction materials are air-fiber systems, such as wood, hemp, cellulose, flax, etc., possibly coated with a mineral paste. They represent a promising solution for carbon emission reduction, due to their low production cost and their partial or full recyclability. Moreover, they bring more comfort to the occupants thanks to their moisture-buffering capacity, and they require less ener

Status
Under Construction
Sector
Water Supply and Storage
Location
France
Updated
22 Jul 2026
Source
EU Funding & Tenders Portal

ConstructChat

Ask ConstructChat about From fiber to wall: PHYSical approach of hygrothermal transfers in BIO-based construction MATerials

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

3 Q
The project “From fiber to wall: PHYSical approach of hygrothermal transfers in BIO-based construction MATerials” is an infrastructure initiative in the Water Supply and Storage sector, located in France. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Participants

Not available for this record.

Status

Original status

ongoing

Taiyo status

Under Construction

Taiyo last update

2026-07-22

Contact

Not available for this record.

Description

Description

Bio-based construction materials are air-fiber systems, such as wood, hemp, cellulose, flax, etc., possibly coated with a mineral paste. They represent a promising solution for carbon emission reduction, due to their low production cost and their partial or full recyclability. Moreover, they bring more comfort to the occupants thanks to their moisture-buffering capacity, and they require less energy for heating or cooling. These qualities are obtained through exchanges between water vapor and “bound water”, i.e., water absorbed in the solid structure, combined with heat transfers. Consequently, understanding and predicting water and heat (hygrothermal) transfers in such materials is essential to selecting them appropriately, adjusting their conditions of use, and designing innovative materials. However, the current analysis of their performance is generally based on limited evaluations at a global scale or via macroscopic models lacking physical information. My idea is instead to open the black box and start from the fiber scale, to explicitly describe the internal physical processes at this scale, including sorption dynamics, bound water diffusion, fiber configuration, etc., and then to progressively complete and extend this approach to full-scale materials. This can be used to build for the first time a generic description, understanding, and modelling, of hygrothermal phenomena in bio-based construction materials. This physical description will be supported and enriched by several experimental innovations. Notably, internal measurements of the spatial distribution of moisture content and temperature in time will be obtained from non-invasive time-resolved magnetic resonance imaging (MRI), which can be used to validate the models and determine diffusion properties in an unequivocal way. Finally, I will develop an open-source software predicting hygrothermal characteristics and performance based on material characteristics and history of ambient conditions.

Location

Country

France

Source

Source

EU Funding & Tenders Portal

URL

More Details

Record type

Project

Sector

Water Supply and Storage

Article published date

2025-12-15

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project