logo
ProjectEnded

Functional & Dynamic 3D Nano- MicroDevices by Direct Multi-Photon Lithography

Sector: Manufacturing (Industrial) • Location: Italy, Netherlands, Austria, Ireland

Source: EU Funding & Tenders Portal

Micro & Nano Electro-Mechanical Systems (MEMS/NEMS) have a huge impact on the market in different areas ranging from consumer to automotive. Nevertheless, their real potential is largely unexplored. This because their development is a long and very expensive process, which often requires long simulation steps. Moreover, arbitrary complex 3D structures cannot be even produced with standard micro/na

Status
Closed
Sector
Manufacturing (Industrial), Automotive
Location
Italy
Updated
22 Jul 2026
Source
EU Funding & Tenders Portal

ConstructChat

Ask ConstructChat about Functional & Dynamic 3D Nano- MicroDevices by Direct Multi-Photon Lithography

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

3 Q
The project “Functional & Dynamic 3D Nano- MicroDevices by Direct Multi-Photon Lithography” is an infrastructure initiative in the Manufacturing (Industrial) sector, located in Italy, Netherlands, Austria, Ireland. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Participants

Not available for this record.

Status

Original status

ended

Taiyo status

Closed

Taiyo last update

2026-07-22

Contact

Not available for this record.

Description

Description

Micro & Nano Electro-Mechanical Systems (MEMS/NEMS) have a huge impact on the market in different areas ranging from consumer to automotive. Nevertheless, their real potential is largely unexplored. This because their development is a long and very expensive process, which often requires long simulation steps. Moreover, arbitrary complex 3D structures cannot be even produced with standard micro/nano-fabrication techniques. 5D NanoPrinting project aims to overcome these limitations, providing an innovative integrated technological approach, based on two-photon 3D direct printing processes. Breakthrough processes for 3D Nano- MicroDevices (NEMS/MEMS) rapid prototyping will be developed, aspiring to become a novel gold standard for micro/nano-technologies, similarly to what 3D printing represented for manufacturing technologies in the last decade. The approach will be based on new ad hoc-developed functional materials, polymerisable via two photon process, exploiting designed/tailored functional properties. In particular, to create complete NEMS/MEMS, a set of basic properties is required, including the possibility to have graded structural, patternable, conductive, and stimuli-responsive materials. Such complex functional materials, compatible with two photon lithographic process, have been not yet demonstrated; then, new suitable materials will be developed combining synthetic and nano-technological approaches. Expected innovation brought by the project will be not limited only to material science, but a great impact at levels of process and system is also expected. Respect to traditional micro/nano-fabrication technologies, the proposed one will be specifically used for: o Rapid prototyping, to test new principles and configurations before final device design o Production of 3D complex or of customizable devices (parametric devices production, e.g. multi-axial nano-force sensors) o Production of low numbers/high added value devices (e.g. cochlear implants).

Location

Country

Italy

Source

Source

EU Funding & Tenders Portal

URL

More Details

Record type

Project

Sector

Manufacturing (Industrial), Automotive

Article published date

2026-03-01

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project