logo
ProjectOngoing

Gen. 4b Solid State Li-ion battery by additive manufacturing

The status, timeline and source of this project. A free account opens every field.

Source: EU Funding & Tenders Portal

AM4BAT will develop innovative component materials and assemble an anode-free all-solid-state battery (ASSB) manufactured by a cost-competitive and sustainable vat photopolymerization 3D printing. The objective is to reach a high-performance battery the energy density of 400 Wh/kg and 1000 Wh/L for electric vehicles applications. This will be achieved by developing materials including i) single cr

Status
Under Construction
Sector
Electric Vehicles (EVs), Energy Storage, Manufacturing (Industrial), Power Generation (CCGT), Automotive
Location
Spain
Updated
22 Jul 2026
Source
EU Funding & Tenders Portal

ConstructChat

Ask ConstructChat about Gen. 4b Solid State Li-ion battery by additive manufacturing

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

3 Q
The project “Gen. 4b Solid State Li-ion battery by additive manufacturing” is an infrastructure initiative in the Electric Vehicles (EVs) sector, located in Spain, France, Austria, Belgium, Germany, Czechia. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Participants

Not available for this record.

Status

Original status

ongoing

Taiyo status

Under Construction

Taiyo last update

2026-07-22

Contact

Not available for this record.

Description

Description

AM4BAT will develop innovative component materials and assemble an anode-free all-solid-state battery (ASSB) manufactured by a cost-competitive and sustainable vat photopolymerization 3D printing. The objective is to reach a high-performance battery the energy density of 400 Wh/kg and 1000 Wh/L for electric vehicles applications. This will be achieved by developing materials including i) single crystal NMC811 with superior energy, ii) LNMO Co-free and higher voltage for power AM4BAT variant, iii) dopped LLZO with different size from 0.5 to 5µm and 50-100 nm for higher loading in the HSE, and iv) novel acrylic, nanocellulose, sustainable photocurable polymer. The materials will be optimized for their processing by additive manufacturing. AM4BAT will then validate the technology via 3-Ah pouch cells reaching TRL5, and will carry out an evaluation of manufacturability, a full sustainability assessment and a recycling study to support customers’ uptake. Identified stakeholder groups as well as other research initiatives will be actively involved to ensure dissemination of AM4BAT results and broader users’ acceptance. With its ambitious concept based on cutting-edge 3D printed ASSB and a strong consortium involving the whole value chain from material providers to an OEM, AM4BAT aims to overcome the remaining technological obstacles of the Gen 4b technology as specified in the work programme and accomplish the urgent shorter-term needs of the battery industry: to make Gen 4b batteries a viable technology beyond 2025. On longer term, the AM4BAT outcomes will contribute to the creation of a sustainable European battery manufacturing value chain helping the EU to succeed in the electric mobility roll-out and accelerate the energy transition.

Location

Country

Spain

Source

Source

EU Funding & Tenders Portal

URL

More Details

Record type

Project

Sector

Electric Vehicles (EVs), Energy Storage, Manufacturing (Industrial), Power Generation (CCGT), Automotive

Article published date

2025-10-15

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project