logo
ProjectEnded

INTEGRATED COMMON ALTITUDE REFERENCE SYSTEM FOR U-SPACE

Ended · Italy, Poland, Spain, Belgium

Source: EU Funding & Tenders Portal

ICARUS project proposes an innovative solution to the challenge of the Common Altitude Reference inside VLL airspaces with the definition of a new U-space service and its validation in a real operational environment. In manned aviation, the methods of determining the altitude of an aircraft are based on pressure altitude difference measurements (e.g. QFE, QNH and FL) referred to a common datum. T

Status
Closed
Sector
Aerospace & Defense, Residential, Airport
Location
Italy, Poland, Spain, Belgium
Updated
22 Jul 2026
Source
EU Funding & Tenders Portal

ConstructChat

Ask ConstructChat about INTEGRATED COMMON ALTITUDE REFERENCE SYSTEM FOR U-SPACE

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

3 Q
The project “INTEGRATED COMMON ALTITUDE REFERENCE SYSTEM FOR U-SPACE” is an infrastructure initiative in the Aerospace & Defense sector, located in Italy, Poland, Spain, Belgium. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Participants

Not available for this record.

Status

Original status

ended

Taiyo status

Closed

Taiyo last update

2026-07-22

Contact

Not available for this record.

Description

Description

ICARUS project proposes an innovative solution to the challenge of the Common Altitude Reference inside VLL airspaces with the definition of a new U-space service and its validation in a real operational environment. In manned aviation, the methods of determining the altitude of an aircraft are based on pressure altitude difference measurements (e.g. QFE, QNH and FL) referred to a common datum. The UA flights superimpose a new challenge, since a small drone may take off and land almost from everywhere, hence reducing the original significance of QFE settings, introduced on behalf of manned pilots to display on the altimeter the 0-height at touchdown on the local runway. In fact, the possibility for n drones to take off at n different places would generate a series of n different QFE corresponding to different heights of ground pressures referred to the take-off “Home points”. Therefore for a large number drones, new methodologies and procedures shall be put in place. The ICARUS defines a new U-space U3 service tightly coupled with the interface of the existing U-space services (e.g. Tracking, and Flight Planning services). The users of ICARUS service shall be remote pilots competent to fly in BVLOS in the specific category of UAS operations and ultralight GA pilots potentially sharing the same VLL airspace. The ICARUS proposed approach foresees the realization of DTM service embedded in an Application Program Interface (API) that can be queried by UAS pilot/operator (or by drone itself) based on the actual positioning of the UA along its trajectory, computed by the (E)GNSS receiver. The output of the DTM service would provide information on distance from ground/obstacles in combination with the common altitude reference. Accuracy, continuity, integrity and availability requirements for GNSS-based altimetry together with accuracy and resolution requirements of the DTM to be provided by ICARUS service are key topics of the study.

Location

Country

Italy, Poland, Spain, Belgium

Source

Source

EU Funding & Tenders Portal

URL

More Details

Record type

Project

Sector

Aerospace & Defense, Residential, Airport

Article published date

2026-02-15

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project