logo
ProjectEnded

Low-cost / energy Efficient Oleds for lighting

Sector: Commercial • Location: France, Italy, Germany, Belgium, Spain

Source: EU Funding & Tenders Portal

LEO ambitions innovative manufacturing concept & routes towards high performance bendable and low cost OLEDs for general and mood lighting, merging conventional and proven technologies with disruptive approaches (e.g. substrate, architecture, hybrid processing, layouts). R&D activities will be ramped-up from lab scale feasibility to pilot line scale demonstration, delivering show off lighting syst

Status
Closed
Sector
Commercial, Manufacturing (Industrial), Government
Location
France, Italy, Germany, Belgium, Spain
Updated
22 Jul 2026
Source
EU Funding & Tenders Portal

ConstructChat

Ask ConstructChat about Low-cost / energy Efficient Oleds for lighting

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

4 Q
The project “Low-cost / energy Efficient Oleds for lighting” is an infrastructure initiative in the Commercial sector, located in France, Italy, Germany, Belgium, Spain. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Participants

Sponsoring Agency

Status

Original status

ended

Taiyo status

Closed

Taiyo last update

2026-07-22

Contact

Not available for this record.

Description

Description

LEO ambitions innovative manufacturing concept & routes towards high performance bendable and low cost OLEDs for general and mood lighting, merging conventional and proven technologies with disruptive approaches (e.g. substrate, architecture, hybrid processing, layouts). R&D activities will be ramped-up from lab scale feasibility to pilot line scale demonstration, delivering show off lighting systems with the help of external lighting manufacturers (Artemide, Technology Luminaires). The project targets the introduction of novel materials combinations (conformable & functionalized metallic substrate, Indium free electrodes and solution-processable organic materials) in large area colour tuneable top emission white OLEDs. Besides dry processing of large area tandem stacks (> 500 cm2), a novel hybrid process flow will be set-up whereby stacks will be wet processed up to the 1st emitting layer prior device completion by dry processing. With common and innovative building blocks (substrate with integrated interconnecting, 80 % transparent top electrode, 1E-6 g/m²/day WVTR scratch resistant thin film encapsulation, 50 % out-coupling efficiency), these two complementary approaches will lead to demonstrations of large area warm/cold white macro-pixels and hybrid full colours RGB OLEDs. LEO will address cost reduction at materials and process levels which represent more than 80% of the total cost of OLED lighting devices, according to a recent study. Leverage will be sought at mostly all layers of the stack with cost impacts at materials, device and system scales. In order to combine necessary and complementary capacities to reach its ambitious goals, LEO has gathered all stakeholders of the OLED lighting device fabrication value chain (except equipment supplier), including substrate and organic materials suppliers (AC&CS, Cynora), an OLED manufacturer (OSRAM OLED) and recognized research centres in the field of OLEDs and life cycle analysis (CEA, CNR, Gaiker).

Location

Country

France, Italy, Germany, Belgium, Spain

Source

Source

EU Funding & Tenders Portal

URL

More Details

Record type

Project

Sector

Commercial, Manufacturing (Industrial), Government

Article published date

2026-01-01

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project