logo
ProjectEnded

Metal flow in laser additive manufacturing using x-ray imaging and machine learning

One of 10,000+ projects Taiyo tracks in United Kingdom.

Source: EU Funding & Tenders Portal

Additive Manufacturing (AM) has been a hot topic for many years. A fundamental understanding of the metal flows in the molten pool is critical to improving the quality of the sample produced by AM. Laser metal deposition (LMD) is one of the most widely used AM methods, which has a high production efficiency, and a special application in repairing the damaged parts with large size and high price. D

Status
Closed
Sector
Education, Manufacturing (Industrial), Metal
Location
United Kingdom
Updated
22 Jul 2026
Source
EU Funding & Tenders Portal

ConstructChat

Ask ConstructChat about Metal flow in laser additive manufacturing using x-ray imaging and machine learning

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

3 Q
The project “Metal flow in laser additive manufacturing using x-ray imaging and machine learning” is an infrastructure initiative in the Education sector, located in United Kingdom. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Participants

Not available for this record.

Status

Original status

ended

Taiyo status

Closed

Taiyo last update

2026-07-22

Contact

Not available for this record.

Description

Description

Additive Manufacturing (AM) has been a hot topic for many years. A fundamental understanding of the metal flows in the molten pool is critical to improving the quality of the sample produced by AM. Laser metal deposition (LMD) is one of the most widely used AM methods, which has a high production efficiency, and a special application in repairing the damaged parts with large size and high price. During the LMD process, a powdery filler is injected from the nozzle onto the surface of the base metal, and a laser beam is used to melt the powders and surface of a specimen. Dynamics of the keyhole and molten pool will determine the temperature distribution and the profile of the molten pool, thus affecting the microstructure of the printed bead. It is difficult to observe the dynamics of the molten pool in AM directly with a camera because the molten pool is surrounded by the solid metal. The objectives of this proposal are to reveal the dynamic characteristics of the keyhole and molten pool in LMD and provide a guide for choosing the proper production parameters for defect-free AM. To achieve the objectives, the X-ray imaging system in the host institute will be used to observe the dynamics of the keyhole and molten pool. With the high-melting-point tungsten particles as the tracers mixed with the metal powders, the flow of the liquid metal in the molten pool could be observed. The machine learning technique is then used to track the flow of the tungsten particles, which makes the quick determination of the flow routes and velocities of the liquid metal possible. The novelty of this proposal is that the x-ray imaging method combined with the machine learning technique is first used to visualize the dynamics of the keyhole and molten pool in LMD. This research could provide a guide for optimizing the process parameters and improving the AM quality, and the achievement of this research could contribute to the development of LMD in the industry.

Location

Country

United Kingdom (UK)

Source

Source

EU Funding & Tenders Portal

URL

More Details

Record type

Project

Sector

Education, Manufacturing (Industrial), Metal

Article published date

2026-02-15

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project