Multi-Material Design using 3D Printing
The status, timeline and source of this project. A free account opens every field.
Source: EU Funding & Tenders Portal
Additive manufacturing (AM) has the economic potential to complement conventional manufacturing processes, especially in the production of complex, multi-material (MM) components. To exploit the full benefits of optimized lightweight structures, it is usually required to use multi-materials with different physical properties. Still, multi-material combinations from conventional processes are not
- Status
- Under Construction
- Sector
- Aerospace & Defense, Geothermal, Manufacturing (Industrial), Electric Vehicles (EVs), Automotive, Government
- Location
- Germany
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Multi-Material Design using 3D Printing
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
Sponsoring Agency |
Status
Original status | ongoing |
Taiyo status | Under Construction |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | Additive manufacturing (AM) has the economic potential to complement conventional manufacturing processes, especially in the production of complex, multi-material (MM) components. To exploit the full benefits of optimized lightweight structures, it is usually required to use multi-materials with different physical properties. Still, multi-material combinations from conventional processes are not transferable to AM, due to residual stresses, cracks or thermal expansion rates of the different materials. Furthermore, geometric shape and position tolerances, as well as recycling strategies for powder waste, post-processed waste and the component itself are not yet defined. Based on the 3D printing processes PBF-LB and DED, this project aims at the concurrent engineering of designing processable multi-material optimized alloys, development of design concepts for multi-material structures with specific simulations for load cases and topology optimizations, and an extensive process adaption. Alloy and process development will be aided by advanced integrated computational material engineering approaches that combine thermodynamics, microstructure, and process simulations through machine-/active learning, resulting in shorter material development cycles. For bulk and powder materials, recycling of multi-material components via innovative concepts will promote the sustainability of multi-material additive manufacturing. This adaption will lead to increased process reliability and speed, enabling the dissemination of MM manufacturing in AM for the entire industry. The consortium brings a wide range of international expertise to the table, from materials research and digitization to the manufacture of multi-material components. It consists of startups, research institutions and market leaders in additive manufacturing. Industrial end-users cover automotive, aerospace and aeronautic applications with specific use cases. |
Location
Country | Germany |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Aerospace & Defense, Geothermal, Manufacturing (Industrial), Electric Vehicles (EVs), Automotive, Government |
Article published date | 2025-10-15 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
