New aerospace advanced cost effective materials and rapid manufacturing technologies
Sector: Aerospace & Defense • Location: United Kingdom, France, Italy, Spain
Source: EU Funding & Tenders Portal
This project will focus on the development of technologies and methodologies which have the potential to save costs and time across the whole life cycle of the aircraft (design, production, maintenance, overhaul, repair and retrofit), including for certification aspects. Moreover it will also target the integration of additional functions or materials in structural components of the aircraft, the
- Status
- Closed
- Sector
- Aerospace & Defense, Hospital, Chemical (Industrial), Manufacturing (Industrial), Education
- Location
- United Kingdom, France, Italy, Spain
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about New aerospace advanced cost effective materials and rapid manufacturing technologies
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | ended |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | This project will focus on the development of technologies and methodologies which have the potential to save costs and time across the whole life cycle of the aircraft (design, production, maintenance, overhaul, repair and retrofit), including for certification aspects. Moreover it will also target the integration of additional functions or materials in structural components of the aircraft, the increased use of automation. The first proposed step is the introduction of the γ-TiAl alloy, a well known promising advanced material for aerospace applications and a revolutionary manufacturing technology. Its specific stiffness and strength, as compared to its low weight, potentially leads to large weight savings (50%), and therefore lower mechanical loads on thermomechanical stressed parts, compared to the common Ni based superalloys. The integration of new material and new manufacturing technology will positively impact several aspects of the manufacturing and maintenance chain, starting from the design, the production, the repair). The aim of this project is twofold: - On one side the work will be focused on the development and integration at industrial of a IPR protected gas atomization process for producing TiAl powders, whose properties must be highly stable from batch to batch. Thanks to the stability of the chemical and granulometric properties of the powders, the application of the Rapid Manufacturing technique to the production of TiAl components will be economically affordable. While this technique is by now well-known, its main drawback resides in the scarce quality of the starting powders. - The other main drawback for the wide industrial application of TiAl components is the integrated optimisation of all the machining steps, that means the setting up of machine tool characteristics and parameters, cutting tool geometry, substrate and coating materials, advanced lubrication technologies. |
Location
Country | United Kingdom, France, Italy, Spain |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Aerospace & Defense, Hospital, Chemical (Industrial), Manufacturing (Industrial), Education |
Article published date | 2026-01-01 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
