Next Generation of Concentrated Photovoltaics Using Node Concentrators
Sector: Power Generation (CCGT) • Location: Germany
Source: EU Funding & Tenders Portal
I invented a thin plastic foil capable of collecting sunlight from a certain incident angle and guiding it to a spot of intense light emission, thereby concentrating the light by a factor of 300 and more. In the first step, ConPhoNo will evaluate the application of the foils for safety features. Here, the foils will be laminated to a product showing bright colorful pictures when properly aligned
- Status
- Closed
- Sector
- Power Generation (CCGT), Solar
- Location
- Germany
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Next Generation of Concentrated Photovoltaics Using Node Concentrators
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | ended |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | I invented a thin plastic foil capable of collecting sunlight from a certain incident angle and guiding it to a spot of intense light emission, thereby concentrating the light by a factor of 300 and more. In the first step, ConPhoNo will evaluate the application of the foils for safety features. Here, the foils will be laminated to a product showing bright colorful pictures when properly aligned to the sun. This application exhibits a high chance of success as the technical feasibility has already been proven, and the relevant market is well-known by the ConPhoNo partner. It is therefore the goal to put these safety features on the market. In parallel, the application of the concentrator foils will be tested in concentrated photovoltaics (CPV), which is the most efficient of all solar energy concepts (world record of 46%). In that case, solar cells will be placed at the spots of intense light emission. Differently from safety features, where a customer is actively checking a product for authenticity by holding it at the right angle into the sun, this is more complex in CPV. In step two, the concentrators will be used with mechanical sun-tracking like state-of-the-art CPV. Here, the concentrator foils will replace the Fresnel lens based concentrators used today. I am confident that these concentrators are superior as they are a hundred times thinner, much easier to produce, and they enable bandgap matching, which may double the efficiency of CPV, reaching a theoretical limit of about 86%. The ability to produce very thin concentrators will also increase the motivation of the CPV industry to scale down the bulkiness of the sun-tracking system. In the third step, it will be evaluated if thin beam steering devices based on electro-wetting may become industrially available and if they can be combined with the new concentrators. The resulting thin CPV modules would drastically reduce the cost of CPV and literally boost worldwide solar energy production. |
Location
Country | Germany |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Power Generation (CCGT), Solar |
Article published date | 2026-02-15 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
More Power Generation (CCGT) projects in Germany
- Veja Mate Offshore Wind Farm Project
- Albatros Offshore Wind Farm North Sea Germany
- Hohe See Offshore Wind Farm North Sea Germany
- EnBW Baltic 2 Offshore Wind Farm
- Herdecke 400MW CCGT GasFired Power Plant Grenada
- Global Tech I Offshore Wind Farm
- Nordsee One Offshore Wind Project North Sea
- Westfalen Power Plant Units D and E Hamm
