Optimization two phases cooling solution using micro pump brick
One of 5,541 projects Taiyo tracks in Netherlands.
Source: EU Funding & Tenders Portal
Traditionally, aeronautical power electronics use liquid and/or air forced cooling systems. These techniques are proven, reliable and robust technology but drawbacks are overweight and limited efficiency to extract heat flow generated in high power and dense converters. This call for proposal consists of studying and developing demonstrators of cooling system based on pumped two-phase techniques i
- Status
- Closed
- Sector
- Aerospace & Defense, Power Generation (CCGT), Metal, Geothermal, Manufacturing (Industrial)
- Location
- Netherlands
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Optimization two phases cooling solution using micro pump brick
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | ended |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | Traditionally, aeronautical power electronics use liquid and/or air forced cooling systems. These techniques are proven, reliable and robust technology but drawbacks are overweight and limited efficiency to extract heat flow generated in high power and dense converters. This call for proposal consists of studying and developing demonstrators of cooling system based on pumped two-phase techniques in order to reduce drastically thermal constrains, weight and dimensions of high dense power electronics modules. This cooling technique, initially developed for space application, becomes a promising solution for the More Electric Aircraft (MEA) concept that allows for densification and growth of on-board power without overweight or thermal issues. This CfP is a scientific and industrial challenge, which provides opportunity of competitiveness on this important improvement part of power electronics dedicated for more electrical aircraft for European partners of Clean Sky. In TOPMOST, three demonstrators of a two-phase pumped system will be built. Key components of the demonstrators will be manufactured with 3D metal printing, which results in lightweight and efficient systems. Two of the demonstrators will be delivered to the Topic Leader Thales, and one demonstrator will be used for extensive qualification tests. The Technology Readiness Level (TRL) of the demonstrators will be 5 at the end of the project. |
Location
Country | Netherlands |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Aerospace & Defense, Power Generation (CCGT), Metal, Geothermal, Manufacturing (Industrial) |
Article published date | 2026-01-15 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
More Aerospace & Defense projects in Netherlands
- KEROGREEN
- Zenid – Sustainable Aviation Fuel from Air
- SCODEV
- Open-Innovation Photonics pilot for NWE
- Green Sustainable Airports
- Integrating metal 3D printing and flexible post processing
- BEtter Response and Improved Safety through UAS
- Integrated Coastal Zone Management - via - Increased situational awareness - through - Innovations on Unmanned Aircraft Systems
