logo

Passive layER FailuRe Mechanisms for Steel Embedded in Alkali-Activated Slag Materials

Sector: Steel • Location: United Kingdom

Source: EU Funding & Tenders Portal

Project
Ended

PERFoRM will unveil how in-service environmental conditions influence the stability of the passive layer on steel rebar embedded in concretes based on low-carbon cementitious materials (i.e. near-neutral salt activated slag materials (NnSAS)), when exposed to environmental threats. NnSAS offer high carbon emission savings, compared to other construction materials, however their long-term performan

Project Information FAQ

Project Information

3 Q
The project “Passive layER FailuRe Mechanisms for Steel Embedded in Alkali-Activated Slag Materials” is an infrastructure initiative in the Steel sector, located in United Kingdom. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Want to explore the full details? View the full report

Participants

Sponsoring Agency

Obfuscated Data

Company

Obfuscated Data

Status

Original status

ended

Taiyo status

Obfuscated Data

Taiyo last update

00-00-0000

Available timestamps

00-00-0000

Available timestamp type

Obfuscated Data

Contact

Contact name

Obfuscated Data

Phone

0000000000

Email

ObfuscatedData@email.com

Address

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Description

Description

PERFoRM will unveil how in-service environmental conditions influence the stability of the passive layer on steel rebar embedded in concretes based on low-carbon cementitious materials (i.e. near-neutral salt activated slag materials (NnSAS)), when exposed to environmental threats. NnSAS offer high carbon emission savings, compared to other construction materials, however their long-term performance is largely unknown. PERFoRM will implement non-destructive techniques (NDTs) for the in-situ diagnosis of steel reinforced concretes, and in-situ tracing of aggressive ions; along with cutting-edge electrochemical techniques to determining corrosion rates closely resembling in-service concrete structures. Advanced characterisation of the passive layer using environmental XPS, and the steel-concrete interface using u-CT will also be carried out. The main scientific focus areas of PERFoRM will be: • Developing novel durability wireless embedded (D-WirE) sensors for in-situ tracing of aggressive ions (e.g., chlorides) and monitoring of internal factors (e.g. relative humidity, pH) in concrete • Ground-breaking work monitoring chemical and physical changes induced by carbonation/chloride penetration in NnSAS mainly using NDTs • Advanced characterisation of the passive layer growth, breakdown, and failure rates of steel rebars embedded in NnSAS • Creation of service-life models by incorporation of in-situ carbonation and chloride penetration regression models PERFoRM will bring unique insight about all potential aspects influencing corrosion mechanism and stability of the passive layer forming in steel embedded in NnSAS. This will enable performance-based materials design, and selection of remediation strategies to ensure the safety of in-service novel self-sensing and low-carbon NnSAS. PERFoRM will be integrated with collaborative programmes coordinated by RILEM and EFC, providing a direct route to international awareness and utilisation of the fellowship outcomes.

Original sub-sector

Obfuscated

Original Currency

USD

Original budget

000000000000000

Procurement method

Obfuscated Data

Budget

000000000000000

Location

Region

Obfuscated

Country

Obfuscated

State

Obfuscated Data

County

Obfuscated

Location

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Source

Source reliability

High

Data quality score

100%

Source

Obfuscated Data

URL

obfuscated_data,obfuscateddata.com

More Details

Project Type

Obfuscated Data

Article Published Date

Obfuscated Data