logo

Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes

Sector: Energy Storage • Location: Ireland

Source: EU Funding & Tenders Portal

Project
Ended

Recent tremendous advances in portable and wearable electronics demand lean, lightweight, and flexible future energy storage devices. Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes, PHyS-2D-GraM is mainly focused on printable flexible and portable energy storage devices based on Two-dimensional (2D) materials and their nanocomposites. The attraction of PHy

Status
Closed
Sector
Energy Storage, Power Generation (CCGT), Education, Manufacturing (Industrial), Government
Location
Ireland
Updated
22 Jul 2026
Source
EU Funding & Tenders Portal

ConstructChat

Ask ConstructChat about Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Project Information FAQ

Project Information

4 Q
The project “Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes” is an infrastructure initiative in the Energy Storage sector, located in Ireland. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Participants

Sponsoring Agency

Status

Original status

ended

Taiyo status

Closed

Taiyo last update

2026-07-22

Contact

Not available for this record.

Description

Description

Recent tremendous advances in portable and wearable electronics demand lean, lightweight, and flexible future energy storage devices. Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes, PHyS-2D-GraM is mainly focused on printable flexible and portable energy storage devices based on Two-dimensional (2D) materials and their nanocomposites. The attraction of PHyS-2D-GraM relies on the excellent electrical conductivity, large-scale and low-cost production capability as well as environmental benignity properties of the hybrid 2D materials that will facilitate me to achieve micro supercapacitors with high power and energy densities which will be a great success of the action for the replacement of batteries used in smart garments. The main objective is to demonstrate and fabricate flexible-printable micro-supercapacitors from hybrid 2D nanocomposites designs of vertically stacked current collectors, electrodes, and electrolytes aimed at higher Specific energy (>10 Wh kg-1) by controlled multiple pass printing with porous microstructure in interface layers. The growth of the energy storage market will be mainly driven by the demand for smart, connected, energy-efficient, flexible devices along with the advantage of significantly low-cost methods of manufacture involved in printed devices. To highlight, research studies are very limited in realizing hybrid MXene-TMD-Graphene inks for flexible micro-supercapacitor which has kindled significant interest and foundation for the PHyS-2D-GraM. All the key components of micro supercapacitors, namely, electrodes, electrolytes, and current collectors, can be fabricated by Inkjet Printing through proper formulation and deposition of 2D hybrid inks. The broad range of experimental skills and the successful collaborations that I established with other world leading groups put me in an excellent position to deliver this timely, high impact research in the action.

Location

Country

Ireland

Source

Source

EU Funding & Tenders Portal

URL

More Details

Record type

Project

Sector

Energy Storage, Power Generation (CCGT), Education, Manufacturing (Industrial), Government

Article published date

2026-02-15

More on this project

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this project
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this project