Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes
Sector: Education • Location: Ireland
Source: EU Funding & Tenders Portal
Recent tremendous advances in portable and wearable electronics demand lean, lightweight, and flexible future energy storage devices. Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes, PHyS-2D-GraM is mainly focused on printable flexible and portable energy storage devices based on Two-dimensional (2D) materials and their nanocomposites. The attraction of PHy
- Status
- Closed
- Sector
- Education, Energy Storage, Power Generation (CCGT), Manufacturing (Industrial), Government
- Location
- Ireland
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
Sponsoring Agency |
Status
Original status | ended |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | Recent tremendous advances in portable and wearable electronics demand lean, lightweight, and flexible future energy storage devices. Printable Hybrid Micro-Supercapacitor Based on 2-D Inks using Graphene, TMDs and M-Xenes, PHyS-2D-GraM is mainly focused on printable flexible and portable energy storage devices based on Two-dimensional (2D) materials and their nanocomposites. The attraction of PHyS-2D-GraM relies on the excellent electrical conductivity, large-scale and low-cost production capability as well as environmental benignity properties of the hybrid 2D materials that will facilitate me to achieve micro supercapacitors with high power and energy densities which will be a great success of the action for the replacement of batteries used in smart garments. The main objective is to demonstrate and fabricate flexible-printable micro-supercapacitors from hybrid 2D nanocomposites designs of vertically stacked current collectors, electrodes, and electrolytes aimed at higher Specific energy (>10 Wh kg-1) by controlled multiple pass printing with porous microstructure in interface layers. The growth of the energy storage market will be mainly driven by the demand for smart, connected, energy-efficient, flexible devices along with the advantage of significantly low-cost methods of manufacture involved in printed devices. To highlight, research studies are very limited in realizing hybrid MXene-TMD-Graphene inks for flexible micro-supercapacitor which has kindled significant interest and foundation for the PHyS-2D-GraM. All the key components of micro supercapacitors, namely, electrodes, electrolytes, and current collectors, can be fabricated by Inkjet Printing through proper formulation and deposition of 2D hybrid inks. The broad range of experimental skills and the successful collaborations that I established with other world leading groups put me in an excellent position to deliver this timely, high impact research in the action. |
Location
Country | Ireland |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Education, Energy Storage, Power Generation (CCGT), Manufacturing (Industrial), Government |
Article published date | 2025-12-01 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
