Reliable Peripheral Interfaces (RPI)
Sector: Manufacturing (Industrial) • Location: United States of America
Source: Grants.gov
Amendment 03: The purpose of this Amendment is to revise Section II "Award Information" as highlighted in yellow in the attached revised full DARPA-BAA-11-08 document.
Amendment 02: The purpose of this Amendment is to revise the Full Proposal due date. Changes are highlighted in yellow in the attached revised DARA-BAA-11-08 document.Amendment 01: The purpose of this Amendment is to correct a
- Status
- Closed
- Sector
- Manufacturing (Industrial), Hospital, Aerospace & Defense, Government, Commercial, Hotel, Residential
- Location
- United States of America
- Updated
- 22 Jul 2026
- Source
- Grants.gov
ConstructChat
Ask ConstructChat about Reliable Peripheral Interfaces (RPI)
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
Sponsoring Agency |
Status
Original status | archived |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | Amendment 03: The purpose of this Amendment is to revise Section II "Award Information" as highlighted in yellow in the attached revised full DARPA-BAA-11-08 document. Amendment 02: The purpose of this Amendment is to revise the Full Proposal due date. Changes are highlighted in yellow in the attached revised DARA-BAA-11-08 document.Amendment 01: The purpose of this Amendment is to correct an administrative error regarding the proposal due date. Changes are highlighted in yellow in the attached revised DARPA-BAA-11-08 document through Amendment 01.Original synopsis below. DARPA seeks to develop reliable in-vivo peripheral motor-signal recording and sensory-signal stimulating interfaces. Such efforts will involve design, fabrication, testing, and analysis of new materials and technologies to demonstrate substantial improvements in reliability and quantity of peripheral motor-signal information. Ultimately DARPA desires to develop clinically viable technologies, enabling wounded service members to control state-of-the-art prosthetic limbs.See full DARPA-BAA-11-08 attached. |
Location
Country | United States of America (USA) |
Source
Source reliability | High |
Source | Grants.gov |
URL |
More Details
Record type | Project |
Sector | Manufacturing (Industrial), Hospital, Aerospace & Defense, Government, Commercial, Hotel, Residential |
Article published date | 2023-06-01 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
More Manufacturing (Industrial) projects in United States of America
- SR 75 FROM SR 2 TO NORTH CAROLINA STATE LINE
- SR 20 FM PRESTON HILLS/LAUREL DR TO CR 715/REYNOLDS RD
- STRUCTURAL STEEL FABRICATION AND ERECTION
- SR 10 FROM CR 107/NORTH LEG DRIVE TO CR 2485/HALE STREET
- CS 493/INDUSTRIAL BLVD FROM SR 19 TO SR 31 - TIA
- SR 19;SR 23; SR 26 & SR 204 @ 9 LOCS - BRIDGE PRESERVATION
- PAULDING COUNTY ITS SYSTEM EXPANSION - PHASE II
- West lake sammamish parkway phase 2
