ROOF 320 Commonwealth AV
Sector: Steel • Location: Boston, Massachusetts, United States of America
Source: City of Boston
-Dismantle and dispose of existing deck. -Consult Engineering -Remove and dispose of existing roof system down to existing wood decking. -Install new pressure treated wood nailer at perimeter to match height of new insulation that is to be installed. -Install 6mil poly plastic vapor barrier over existing wood decking to meet MA building code. -Install 3.5" Polyisocyanurate insulation. Insulation b
- Status
- Prospective
- Sector
- Steel, Metal, Commercial, Government, Manufacturing (Industrial)
- Location
- Boston, Massachusetts, United States of America
- Updated
- 19 Nov 2026
- Source
- City of Boston
ConstructChat
Ask ConstructChat about ROOF 320 Commonwealth AV
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
Sponsoring Agency |
Status
Original status | open |
Taiyo status | Prospective |
Taiyo last update | 2026-11-19 |
Contact
| Not available for this record. |
Description
Description | -Dismantle and dispose of existing deck. -Consult Engineering -Remove and dispose of existing roof system down to existing wood decking. -Install new pressure treated wood nailer at perimeter to match height of new insulation that is to be installed. -Install 6mil poly plastic vapor barrier over existing wood decking to meet MA building code. -Install 3.5" Polyisocyanurate insulation. Insulation boards will be mechanically fastened with approved roofing plates and fasteners. -Install new Firestone .060mil black EPDM membrane over newly installed insulation. Membrane will be fully adhered with approved bonding adhesive. -Seams will be treated with an application of primer wash and a 3" butyl-based seam tape. -All projections ad penetrations will be flashed to new membrane with pre-molded flashing or an uncured flashing field wrap. -Wall membrane will be tucked up under existing metal coping and terminated with a 4" aluminum counterflashing. -Furnish and install new 16oz copper drip edge metal flashing at front and rear edge of the roof. -Provide manufacturer's 20 year warranty. |
Budget |
Location
Country | United States of America (USA) |
State | Massachusetts |
City | Boston |
Source
Source | City of Boston |
URL |
More Details
Record type | Project |
Sector | Steel, Metal, Commercial, Government, Manufacturing (Industrial) |
Article published date | 2025-08-28 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
More Steel projects in United States of America
- STRUCTURAL STEEL FABRICATION AND ERECTION
- SR 7; SR 91 & SR 520 @ 4 LOCS - BRIDGE PRESERVATION
- SR 83 @ SHOAL CREEK
- Annenberg Science Complex - James M. Rosser Hall [027B-ASCR]
- ADD NEW PRE-FAB STEEL GARAGE 780SQ FT SHARES PLANS WITH 202104289 & 202104326
- REPLACE DAMAGED STEEL COLUMN
- Courthouse Commons Tunnel
- Los Angeles City Hall
