Signal Processing at RF (SPAR)
The status, timeline and source of this project. A free account opens every field.
Source: Grants.gov
Amendment 03: The purpose of this amendment is to delete Attachment 1, “Proposer Checklist,” in its entirety and replace with the version provided in Enclosure 1 attached hereto. Enclosure 2 highlights in yellow the changes made and is provided for information purposes only. Amendment 02: The purpose of this amendment is to update the center frequency metric for both TA1 and TA2. It will now be
- Status
- Closed
- Sector
- Aerospace & Defense, Government, Commercial, Residential
- Location
- United States of America
- Updated
- 22 Jul 2026
- Source
- Grants.gov
ConstructChat
Ask ConstructChat about Signal Processing at RF (SPAR)
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
Sponsoring Agency |
Status
Original status | archived |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | Amendment 03: The purpose of this amendment is to delete Attachment 1, “Proposer Checklist,” in its entirety and replace with the version provided in Enclosure 1 attached hereto. Enclosure 2 highlights in yellow the changes made and is provided for information purposes only. Amendment 02: The purpose of this amendment is to update the center frequency metric for both TA1 and TA2. It will now be a proposer defined metric between 0.9 and 1.1 GHz for both TAs. All changes made to the BAA are highlighted in yellow. See the attached DARPA-BAA-16-20 document through Amendment 02. Amendment 01: The purpose of this amendment is to update Table 1, “Technical Area 1 Metrics” on Page 14 and Table 2, “Technical Area 2 Metrics” on Page 16 of the BAA. All changes made to the BAA are highlighted in yellow. See the attached DARPA-BAA-16-20 document through Amendment 01.DARPA seeks to transform radio frequency (RF) systems by developing RF analog signal processing and nonreciprocal technologies that perform unprecedented levels of in-band interference suppression. The Signal Processing at RF (SPAR) technology aims to mitigate both self and externally generated interfering signals of known and unknown characteristics. The goal of SPAR isto demonstrate novel in-band signal interference mitigation technologies using analog signal processing techniques as well as novel chip-scale circulator approaches. |
Location
Country | United States of America (USA) |
Source
Source reliability | High |
Source | Grants.gov |
URL |
More Details
Record type | Project |
Sector | Aerospace & Defense, Government, Commercial, Residential |
Article published date | 2023-06-01 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
More Aerospace & Defense projects in United States of America
- SAT Terminal B
- Southwest Airlines BWI New Tech Ops Hangar East
- SFO United Airlines Terminal 3 Ticket Counter Redesign and Break Room Refresh
- TPA Parking Garage & Administration Building
- MDW Terminal & Concourse
- Seattle-Tacoma International Airport (SEA) International Arrivals Facility
- LAX Tom Bradley International Terminal Renovation, Apron, & Concourse Demolition
- SJC North Concourse
