Solid Oxide Stack Lean Manufacturing
Sector: Power Generation (CCGT) • Location: Italy, Austria, Switzerland, Germany
Source: EU Funding & Tenders Portal
The proposed SOSLeM project will contribute to the call objectives by improving production processes as well as developing and applying novel manufacturing technologies for FC stacks. The improvements proposed by the project will sum up to a reduction of manufacturing costs of about 70%, leading to decreased capital cost of about 2.500 €/kW. Besides these outstanding economical and technical impr
- Status
- Closed
- Sector
- Power Generation (CCGT), Manufacturing (Industrial), Water Supply and Storage
- Location
- Italy, Austria, Switzerland, Germany
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Solid Oxide Stack Lean Manufacturing
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | ended |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | The proposed SOSLeM project will contribute to the call objectives by improving production processes as well as developing and applying novel manufacturing technologies for FC stacks. The improvements proposed by the project will sum up to a reduction of manufacturing costs of about 70%, leading to decreased capital cost of about 2.500 €/kW. Besides these outstanding economical and technical improvements, production material will be spared and environmental benefits will be realized. Specifically, the project will: - Develop new and optimized processes for cassettes production, by avoidance brushing of cassettes, improved sealing adhesion on cassettes, automation of welding, lean manufacturing processes and anode contact layer laser welding, - Improve stack preparation, by advanced glass curing and stack conditioning and improved gas stations, - Enable environmental benefits by Cu-based instead of Co-based powder and evaluation of On-site Nickel removal from waste water - Reduce production time and costs and improve flexibility, by large furnace arrangement, introduction of a multi-stack production station, examination of substituting Co-based powder by Cu-based power, Examination of partially substituting Co-based powder by enamel coating and simultaneous sintering. |
Location
Country | Italy, Austria, Switzerland, Germany |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Power Generation (CCGT), Manufacturing (Industrial), Water Supply and Storage |
Article published date | 2026-01-15 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
