Ultra-Lightweight Concrete for 3D printing technologies
Ended · Germany
Source: EU Funding & Tenders Portal
The construction industry does not follow the same enlightened path as other fields of science and has thus suffered a technology bypass, relying on centuries-old processes and procedures to manage complex modern projects. In conventional concrete construction projects, more than 60% of the total cost is spent on the formwork. One of the technologies which can revolutionize our perception and appr
- Status
- Closed
- Sector
- Cement, Manufacturing (Industrial)
- Location
- Germany
- Updated
- 22 Jul 2026
- Source
- EU Funding & Tenders Portal
ConstructChat
Ask ConstructChat about Ultra-Lightweight Concrete for 3D printing technologies
Pick a question to edit it, or write your own.
First answer free · no account
Project Information FAQ
Project Information
Participants
| Not available for this record. |
Status
Original status | ended |
Taiyo status | Closed |
Taiyo last update | 2026-07-22 |
Contact
| Not available for this record. |
Description
Description | The construction industry does not follow the same enlightened path as other fields of science and has thus suffered a technology bypass, relying on centuries-old processes and procedures to manage complex modern projects. In conventional concrete construction projects, more than 60% of the total cost is spent on the formwork. One of the technologies which can revolutionize our perception and approach to construction, is 3D printing of concrete. 3D printing, also referred to as Additive Manufacturing (AM), is a technology which builds solid parts via a layer-by-layer process. Since in 3D printing, no formwork is required, and a short project time is required due to continuous work done by the printer, a dramatic reduction in the project cost and improvement of workers’ safety can be achieved. Up to date, much research has been conducted in the field of printing technique, while design of proper insulation of printed walls has gathered little attention. Although, this issue is highly important due to gradually tightening EU regulations. Therefore, proposed project is aiming to fill the gap in knowledge and introduce for the first-time insulating ultra-lightweight concrete (ULWC) material for AM. By proposed interdisciplinary methodology, based on the experimental and numerical methods, in micro- and macro-scales technology, a multi-scale tool enabling to produce advanced 3D printed wall systems. Multi-scale tool will allow to develop 3D models of ULWCs with optimized mechanical and insulating properties. Hence, limited amount of required field and labor works will be necessary, thus further decrement of the final concrete cost and waste production will be achieved. Through the interdisciplinary approach and establishing industrial cooperation, this project will contribute towards development and production of energy saving constructions in accordance with EU Energy Efficiency Strategy. |
Location
Country | Germany |
Source
Source | EU Funding & Tenders Portal |
URL |
More Details
Record type | Project |
Sector | Cement, Manufacturing (Industrial) |
Article published date | 2026-02-01 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this project
- News and media coverage
- Technical research
Free account · no card · lands you back on this project
