logo

Van’s RV-10 Single Engine Aircraft

Sector: Aerospace & Defense • Location: Thailand

Source: Aerospace Technology

Project
Closed

RV-10 showcased in Sun and Fun 2006 show in Lakeland, Florida. Frontview of RV-10 featuring gull-winged doors. Van's RV-10 South West Regional Fly in Hondo, Texas. A single engine four-seat aerobatic airplane, the Van’s RV-10, is designed and manufactured by Van’s Aircraft, Austria. It is the first four-seat, low-wing and home-built aircraft in the RV series. The aircraft completed its maiden fli

Project Information FAQ

Project Information

3 Q
The project “Van’s RV-10 Single Engine Aircraft” is an infrastructure initiative in the Aerospace & Defense sector, located in Thailand. Taiyo aggregates data on it from Aerospace Technology.

Want to explore the full details? View the full report

Participants

Sponsoring Agency

Obfuscated Data

Company

Obfuscated Data

Status

Original status

closed

Taiyo status

Obfuscated Data

Taiyo last update

00-00-0000

Available timestamps

00-00-0000

Available timestamp type

Obfuscated Data

Contact

Contact name

Obfuscated Data

Phone

0000000000

Email

ObfuscatedData@email.com

Address

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Description

Description

RV-10 showcased in Sun and Fun 2006 show in Lakeland, Florida. Frontview of RV-10 featuring gull-winged doors. Van's RV-10 South West Regional Fly in Hondo, Texas. A single engine four-seat aerobatic airplane, the Van’s RV-10, is designed and manufactured by Van’s Aircraft, Austria. It is the first four-seat, low-wing and home-built aircraft in the RV series. The aircraft completed its maiden flight in May 2003 and was entered into service in September 2003. About 278 RV-10 aircraft were built up until February 2010. Low cost, superior performance and less maintenance have made the RV-10, the best alternative in its series. The aircraft also decreases the workload of the pilot as it responds quickly to small control inputs. The aircraft has been constructed with aluminium material. The cabin structure and gull winged doors are built with composite materials. Design Initially designed as touring aircraft, the RV-10 features aerobatic and lighter managing capabilities. The design of the aircraft primarily focuses on greater stability and payload. The aircraft has been designed without a hinged sliding canopy. The design of RV-10 allows it to operate on very short runways. The aircraft can climb at high density altitudes. The high cruise speed of the aircraft can be achieved through clean and light airframe rather than through consumptive engine. Occupant protection has been considered an important criterion during the design of RV-10. The computer-aided design of the aircraft produces the kit with pre-drilled rivet holes, thereby reducing assembly time for the manufacturer. Van’s RV-10 features The aircraft features two brightly coloured light emitting diode (LED) displays, a multi-function or high-speed processing system and two gull-winged doors. It also features low stall and landing speed capabilities. The LED, which offers high visibility displays the range values in red and green. Green is indicated when the aircraft is within the range. When the aircraft is flying out of range, numbers will be spotted in red. The aircraft’s doors provide access to the four seats. Fibre glass panels with central console are installed in the cockpit. Cabin The RV-10 comprises a spacious and comfortable cabin with more leg room for passengers. The cabin can accommodate four adults, up to 6 feet 4 inch tall. If less than four people are travelling in the aircraft, the rear seats can be removed within a couple of minutes to provide additional baggage space. The cabin’s interior has been designed with oregon aero seats and seat cushions to provide luxurious comfort to the occupants. The baggage compartment of the aircraft can take 100lbs through the baggage door on the left side. Avionics The avionics suite installed in the RV-10 includes primary flight display (PFD), multi function display (MFD), dual battery systems, flap control, electrical breakers, lighted switches and electronic flight instrumentation system (EFIS). The fibre glass panels, which are equipped with the cockpit avionics systems are supplied by Accuracy Avionics, Inc. Landing gear A fixed non-retractable tricycle type landing gear allows the aircraft to land in small airports, grass, gravel or pavement. The landing gear is constructed with robust tubular steel. The nosewheel mounting tube is joined to the engine mount and the aircraft can be manoeuvred with differential braking. The brakes are fitted to the rudder pedal toes. Engine The RV-10 is powered by a single six cylinder Lycoming IO-540D4A5 engine. Each engine can produce 157 to 194kW of power. The prototype aircraft was powered by IO-540 engine. It also features a Hartzell two-blade fixed-speed propeller. Each propeller can rotate at a speed of 2,700rpm. The length of the engine is 0.98m. The width and height of the engine are 0.84m and 0.62m respectively. The dry weight of the IO-540 is 175kg. The fuel capacity of the aircraft is 60US gallons. Performance The RV-10 can climb at the rate of 7.4m/s. Its maximum speed is 332km/h. The range and service ceiling of the aircraft are 1,600km and 6,100m respectively. The aircraft weighs around 689kg and its maximum take-off weight is 1,181kg. The loaded weight is 1,225kg.

Original sub-sector

Obfuscated

Original Currency

USD

Original budget

000000000000000

Procurement method

Obfuscated Data

Budget

000000000000000

Location

Region

Obfuscated

Country

Obfuscated

State

Obfuscated Data

County

Obfuscated

Location

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Source

Source reliability

High

Data quality score

100%

Source

Obfuscated Data

URL

obfuscated_data,obfuscateddata.com

More Details

Project Type

Obfuscated Data

Article Published Date

Obfuscated Data