logo

varnish and sol-gel multifunctional ProtectIve cLear cOat for aeronauTics

Sector: Manufacturing (Industrial) • Location: France, Belgium

Source: EU Funding & Tenders Portal

Project
Ended

The project PILOT aims to develop two types of formulation technologies classes; a new UV hybrid varnish, which will combine the use of organic and silicone epoxy materials cured by the UV technology and a new hybrid solgel coating, where organic/silicone networks are reinforced by using colloidal particles of silica. Both technologies can be applied on a final paint scheme, but each of them has t

Project Information FAQ

Project Information

3 Q
The project “varnish and sol-gel multifunctional ProtectIve cLear cOat for aeronauTics” is an infrastructure initiative in the Manufacturing (Industrial) sector, located in France, Belgium. Taiyo aggregates data on it from EU Funding & Tenders Portal.

Want to explore the full details? View the full report

Participants

Sponsoring Agency

Obfuscated Data

Company

Obfuscated Data

Status

Original status

ended

Taiyo status

Obfuscated Data

Taiyo last update

00-00-0000

Available timestamps

00-00-0000

Available timestamp type

Obfuscated Data

Contact

Contact name

Obfuscated Data

Phone

0000000000

Email

ObfuscatedData@email.com

Address

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Description

Description

The project PILOT aims to develop two types of formulation technologies classes; a new UV hybrid varnish, which will combine the use of organic and silicone epoxy materials cured by the UV technology and a new hybrid solgel coating, where organic/silicone networks are reinforced by using colloidal particles of silica. Both technologies can be applied on a final paint scheme, but each of them has their particularities in terms of formulation, application and final properties. These differences will allow to cover a very large range of possibilities and will increase the chance of success of this project. The approach of the project is to get an efficient optically transparent multifunctional clear coat, which will able to protect the surface of the wings of business jet or HTP. While keeping the laminar flow, the technical solutions will have the capacity to: • Protect the substrate against contamination • Protect the substrate against icing formation • Resist to the erosion • Resist to the UV degradation • Dissipate the electrostatic charges • Be easily repaired To reach the target of the project, the consortium considers two different technologies, which have already shown their ability to match with Aerospatiale needs. For each approach, an existing solution has been selected. Several properties, according to the technical requirements, have been already tested. The project PILOT will fine tune them in order to fulfil the technical specifications. The project will start with a bibliographic study, whose objectives are to make a state of the art of the last updated technologies, a legislation survey, a screening of the commercial raw material in order to design the update formulations coatings. Then, based on the literature, the coatings will be formulated and applied on the required substrates, taking into account industrial constraints. Finally, coatings will be characterized to validate the required functionalities, defined in the topic.

Original sub-sector

Obfuscated

Original Currency

USD

Original budget

000000000000000

Procurement method

Obfuscated Data

Budget

000000000000000

Location

Region

Obfuscated

Country

Obfuscated

State

Obfuscated Data

County

Obfuscated

Location

Obfuscated Data, Obfuscated data, obfuscated data, Obfuscated data

Source

Source reliability

High

Data quality score

100%

Source

Obfuscated Data

URL

obfuscated_data,obfuscateddata.com

More Details

Project Type

Obfuscated Data

Article Published Date

Obfuscated Data