Wirtgen SP 94i Slipform Paving rehabilitating Interstate 44 in Missouri

ongoing

Paving an interstate highway is always a challenge, with tight time frames and confined working areas force contractors to make the most of every square inch of working space. To rehabilitate the lanes, Capital Paving & Construction removed the old concrete and rebuilt the roadway in two sections using a Wirtgen SP 94i. The first segment had a total width of 19 ft (5.8 m), the second segment had a width of 22 ft (6.7 m). Each consisting of a 12 ft (3.7 m) wide lane and an adjacent shoulder. In total, the highway was renewed over a length of 8 miles (13 kilometres). Access to the construction site on the interstate posed a major challenge for this project. Trucks could only unload the concrete directly in front of the machine, as there was not enough space to feed from the side. Choosing the right equipment for this project therefore was essential. High productivity can only be achieved with machines that offer operators the simplest, most practical and convenient operation possible. The simpler the control of the machine and the higher the degree of automation of the process, the more time the operator can spend on processing the concrete itself. Even apparently small improvements to the machine can have a major impact on the overall result. When paving concrete, it is important to avoid any interruptions. To ensure a smooth process, the logistics and the paving team have to be perfectly coordinated. In addition, the machine and all its components must be set up carefully on the construction site.