- A Low Abrasion Non - Wappinger Crushed Limestone

2026-11-03

SPECIFICATIONS FOR 1 - A LOW ABRASION NON WAPPINGER LIMESTONE GENERAL : Low Abrasion Non Wappinger Crushed Limestone shall consist of clean , washed , durable , sharp - angled fragments of rock of uniform quality produced by crushing LEDGE ROCK from natural consolidated mineral deposits . Said source of material shall have been previously tested and found acceptable under the latest edition of the New York State Department of Transportation " Standard Specifications Construction and Materials " previously referenced , Section 703 - 02 Coarse Aggregate . Proof of conformance and testing results , from a certified testing agency , must be furnished with return bid . Contract Period : One ( 1 ) year from the date that the bid is adopted . By mutual agreement of both parties , this contract may be extended for an additional One ( 1 ) year period under the same terms and conditions . DETAILED : Materials to be provided shall consist of crushed rock of uniform quality which shall have been previously tested and found acceptable under the Crushed Stone requirements of Section 703 - 02 , Coarse Aggregate , of the New York State Department of Transportation " Standard Specifications Construction anp Materials ". All requirements pertaining to said crushed limestone specifications shall be met with the exception of the following : The maximum percent loss by weight at 10 cycles for the Magnesium Sulfate Soundness Test ( NYS DOT 207 ) shall be 12 %: and The maximum percent loss by weight ( Grading A or B ) for the Los Angeles Abrasion Test ( AASHTO T96 ) shall be 25 %. The size designated shall conform to the gradation listed in Table 703 - 4 of the " Standard Specifications ". QUANTITY : Winner of bid must be able to supply The Town of Thompson with between 2000 and 5000 ton of stone .

New York

2026-05-05