( 3 ) Patriot Airboats with motors and Trailers
Sector: Water Supply and Storage • Location: Minnesota, United States of America
Source: Minnesota Purchasing Group
Provide three ( 3 ) Patriot Airboat 18 ’ x 8 ’ 2 ”, with Marine Power 6 . 6 Direct Injected LT 525HP motor and galvanized trailer , or State approved equals for Department of Natural Resources ( DNR ). Boat ( Internal note : K071 , 119 , 175 ) – Quantity 3 2 . 1 New 2026 or newer Patriot Airboat 18 ’ X 8 ’ 2 ” or Sta
- Status
- Closed
- Sector
- Water Supply and Storage, Metal, Power Generation (CCGT), Steel
- Location
- Minnesota, United States of America
- Updated
- 3 Nov 2026
- Source
- Minnesota Purchasing Group
ConstructChat
Ask ConstructChat about ( 3 ) Patriot Airboats with motors and Trailers
Pick a question to edit it, or write your own.
First answer free · no account
Tender Information FAQ
Tender Information
Participants
| Not available for this record. |
Status
Original status | closed |
Taiyo status | Closed |
Taiyo last update | 2026-11-03 |
Contact
| Not available for this record. |
Description
Description | Provide three ( 3 ) Patriot Airboat 18 ’ x 8 ’ 2 ”, with Marine Power 6 . 6 Direct Injected LT 525HP motor and galvanized trailer , or State approved equals for Department of Natural Resources ( DNR ). Boat ( Internal note : K071 , 119 , 175 ) – Quantity 3 2 . 1 New 2026 or newer Patriot Airboat 18 ’ X 8 ’ 2 ” or States Approved Equal . 2 . 2 Boat Length : approx . 18 ’ 2 . 3 Beam Width minimum : 98 ” 2 . 4 Fuel Tank minimum : 50 gallons 2 . 5 Steering : Tiller 2 . 6 Color : OD Green 2 . 7 HULL WITH ALL WELDED ALUMINUM , NO SPLICING OF BOTTOM : 2 . 7 . 1 18 ’ FT Hull Constructed of all Marine Grade 5086 Alloy Aluminum 2 . 7 . 2 Bottom Thickness : 0 . 250 ” * 5086 alloy ( no splices in bottom ) 2 . 7 . 3 Side thickness : 0 . 125 ” ( 29 ” DEPTH IN REAR SIDE ) * 5086 alloy ( no Splices in sides ) 2 . 7 . 4 Transom : 0 . 190 ” * 5086 Alloy Must be waterjet or laser cut for precise fit 2 . 7 . 5 Deck : 0 . 125 ” * 5086 Alloy and Must be waterjet or laser cut for precise fit 2 . 7 . 6 Splash tray : 0 . 190 ” * 5086 Alloy and Must be waterjet or laser cut for precise fit 2 . 7 . 7 Rear Corner gussets : 0 . 250 ” ( WELDED TOP AND BOTTOM ) * 5086 alloy water jet cut 2 . 7 . 8 Bulkhead : 0 . 190 ” ( 100 % WELDED , NOT JUST OVER T - BARS ) * 5086 alloy & waterjet cut |
Location
Country | United States of America (USA) |
State | Minnesota |
Source
Source | Minnesota Purchasing Group |
URL |
More Details
Record type | Tender |
Sector | Water Supply and Storage, Metal, Power Generation (CCGT), Steel |
Article published date | 2026-04-29 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this tender
- News and media coverage
- Technical research
Free account · no card · lands you back on this tender
More Water Supply and Storage tenders in United States of America
- RFP - Thurston County Lake Management Districts Submerged Aquatic Vegetation Control
- Coatings for Wet Well and Manholes
- Sole Source for Wedeco UV BulbsBallets
- Security Hardware Services
- Chambers Creek Regional Wastewater Treatment Plant BNR Aeration Basin Airflow Meters
- Se Dixie Highway County Road A1A Utility Relocation Project
- UNPAINTED SNOW FENCE AND DUNE GRASS NO II
- PreQualification of Bidders for Chaboya Improvements
