155Mm Linear Variable Displacement Transducers Equipment
Sector: Aerospace & Defense • Location: US ARMY YUMA PROVING GROUND301 C STREETYUMA, AZ 85365
Source: SAM.gov
- 155mm Calibration Guide Tube Assembly for use with LVDT Scanner Assembles ? The GTA shall allow the calibration ring to be removed while the GTA is attached to the cannon muzzle, allowing calibration to be performed with the GTA attached to the cannon muzzle.? The length of GTA shall support holding the crawler and LBIS and LVDT sensors, while allowing removal of the calibration ring of the can
- Status
- Prospective
- Sector
- Aerospace & Defense, Advanced Electronics, Commercial, Residential, Manufacturing (Industrial)
- Location
- United States of America
- Updated
- 3 Nov 2026
- Source
- SAM.gov
ConstructChat
Ask ConstructChat about 155Mm Linear Variable Displacement Transducers Equipment
Pick a question to edit it, or write your own.
First answer free · no account
Tender Information FAQ
Tender Information
Participants
| Not available for this record. |
Status
Original status | combined synopsis/solicitation |
Taiyo status | Prospective |
Taiyo last update | 2026-11-03 |
Contact
| Not available for this record. |
Description
Description | 1. 155mm Calibration Guide Tube Assembly for use with LVDT Scanner Assembles ? The GTA shall allow the calibration ring to be removed while the GTA is attached to the cannon muzzle, allowing calibration to be performed with the GTA attached to the cannon muzzle.? The length of GTA shall support holding the crawler and LBIS and LVDT sensors, while allowing removal of the calibration ring of the cannon tube 155mm M284 and M776 models2. 155mm Self-Propelled Sensor Delivery Unit (SDU shall meet the following specifications? The SDU shall be capable of pushing or pulling the sensor 120mm sensors over an axial distance of no less than 35 feet).? The SDU shall be provided with a muzzle adapter that is capable of being mounted to 155mm gun tubes.? The SDU shall be capable of being interfaced with existing YPG-owned 155mm LBIS/LVDT/VBIS sensors.? The SDU shall be provided with a flexible cable that includes a non-scratch protective cover.? The SDU shall be capable of allowing data acquisition over the full length of the 155 mm bore and up to the muzzle.? Linear resolution shall be 0.010? or better? Uni-directional position repeatability goal shall be 0.040? or better |
Original sector | Not Identified |
Location
Country | United States of America (USA) |
Source
Source | SAM.gov |
URL |
More Details
Record type | Tender |
Sector | Aerospace & Defense, Advanced Electronics, Commercial, Residential, Manufacturing (Industrial) |
Article published date | 2026-06-26 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this tender
- News and media coverage
- Technical research
Free account · no card · lands you back on this tender