2026 Calibration of CFS Lab Equipment and Scales

2026-11-03

Laboratory Equipment / Machines All equipment must be verified full range in the direction specified . The service technician must be fully trained and able to set up and access all proprietary software involved in calibrating and verifying equipment . The service technician must be able to calibrate and adjust devices as needed for verification purposes . All verifications / calibrations must be performed in accordance with applicable sections of ASTM E4 , ASTM D76 , ASTM E74 , and ASTM E467 . All verification / calibration equipment must conform to a quality assurance program meeting ISO / IEC 17025 . Individual reports must be provided for each piece of equipment . Each report must contain the following : Laboratory Name Machine Name Service Date Scales and Balances The service technician must be qualified to calibrate scales to a readability of 0 . 0001g or higher . Some scales / balances require a large amount of weight and must be verified prior to performing calibration . Individual reports must be provided for each piece of equipment . Each report must contain the following : Laboratory Name Machine Name Service Date Linearity Readability As - Found / As - Left with readings taken on eccentricity Standard must be traceable to NIST . Bolt Tension Calibrators Skidmore - Wilhelm brand / model . Individual reports must be provided for each piece of equipment . Each report must contain the following : Laboratory Name Machine Name Service Date Linearity Readability As - Found / As - Left with readings taken on eccentricity Standards must be traceable to NIST .

MITN

2026-04-29