2026 Cold Mix Asphalt
One of 10,000+ tenders Taiyo tracks in Kansas.
Source: Kansas Purchasing Group
produce cold mix asphalt materials for the 2026 asphalt program . A minimum of 8 , 000 tons and a maximum of 12 , 000 tons , with the tonnage amount to be determined later is required for bidding purposes . Base bid shall be for contractor to supply aggregates ( ½ ” chips , ¼ ” screenings and sand ) and mix
- Status
- Closed
- Sector
- Road, Oil and Gas, Bridge
- Location
- Kansas, United States of America
- Updated
- 3 Nov 2026
- Source
- Kansas Purchasing Group
ConstructChat
Ask ConstructChat about 2026 Cold Mix Asphalt
Pick a question to edit it, or write your own.
First answer free · no account
Tender Information FAQ
Tender Information
Participants
| Not available for this record. |
Status
Original status | closed |
Taiyo status | Closed |
Taiyo last update | 2026-11-03 |
Contact
| Not available for this record. |
Description
Description | produce cold mix asphalt materials for the 2026 asphalt program . A minimum of 8 , 000 tons and a maximum of 12 , 000 tons , with the tonnage amount to be determined later is required for bidding purposes . Base bid shall be for contractor to supply aggregates ( ½ ” chips , ¼ ” screenings and sand ) and mixing for the cold mix with Ellis County separately contracting asphalt oil ( emulsion ). Contractor will be required to mix asphalt utilizing Ellis County ’ s and KDOT ’ s Standards and Specifications as stated in paragraph two ( 2 ) of this Request for Proposal . The contractor will furnish all labor , equipment , and fuel necessary to mix and deliver products to the Ellis Yard located at 500 East 9th Street , Ellis , Kansas . All asphalt mixing shall conform to the Requirements of Division 600 of the Standards and Specifications for State Road and Bridge Construction and Kansas Department of Transportation , with special attention given to temperatures . The maximum temperature of the finished product from the discharge chute shall be no more than 185 to 200 degrees Fahrenheit for the use of CMS - 1 emulsion asphalt . The workability of the finished product must be maintained , and stockpile workability and longevity must be maintained . All produced asphalt will ultimately be bladed on Ellis County roads by county forces . Weight of the total mix shall be based on the mixing plant aggregate totalizer , or a calculated weight obtained from scales provided by the contractor . Fiscal Year 2026 mix components are 15 % ½ ” chips , 65 % ½ ” sand , and 20 % ¼ ” screenings , with an estimated 5 . 8 - 6 . 25 % emulsion . A second mix component may be considered with 60 % sand , and 40 % screenings with an estimated 6 . 8 % to 7 . 0 % emulsion . Final gradations and mixed quantities will be provided prior to notice to proceed . ( Only CMS - 1 emulsion asphalt shall be considered for the asphalt mix design ). Mix design is subject to change due to aggregate availability . |
Location
Country | United States of America (USA) |
State | Kansas |
Source
Source | Kansas Purchasing Group |
URL |
More Details
Record type | Tender |
Sector | Road, Oil and Gas, Bridge |
Article published date | 2026-04-08 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this tender
- News and media coverage
- Technical research
Free account · no card · lands you back on this tender
More Road tenders in United States of America
- RFP - Pro-Tem Hearing Examiner
- NEW TIRES RETREADS AND TIRE SERVICES
- Professional Construction Engineering and Inspection CEI Services for the Williamson Boulevard Widening
- Lincoln Avenue Wascher to Killarney Preliminary Engineering Section 220065800PV
- KilleenFort Hood Regional Airport KFHRA Terminal Apron Rehabilitation Phase II
- IFB 947902022JM Screening 10 Asphalt Filter Stone 8 Granite Double Washed
- IFB 914202022AM Street Sweeper Parts and Brooms
- IFB 843402021AB Hay Alfalfa and Wheat Straw for Norfolk Zoo
