20814 363rd Lane , McGregor IHS Septic

2026-11-03

1 . Install an on - site septic system per the approved septic design provided by Environmental Systems dated 7 / 26 / 24 . Contractor shall ensure a complete and functional system . 2 . Contractor is responsible for removal of the existing mound in its entirety . All materials to be disposed of offsite . 3 . The existing tank must remain in place during mound removal , drying and construction of new mound . Contractor shall be responsible for pumping the tank throughout construction . Contractor shall include cost to pump tank 4 times ( completely full ) during the project . Any difference in pumping shall be credited back ; or added if additional pumping can be proven and was necessary due to drying time . 4 . After new mound is in place , the contractor shall have the existing septic tanks pumped and crushed or filled . Contractor shall assume existing tank holds up to 2 , 500 gallons . Contractor shall complete tank abandonment form and submit a copy to the Project Coordinator . 5 . Contractor shall be responsible for obtaining an AItkin County septic permit and coordinating required inspections . 6 . Contractor shall be responsible for contacting the Aitkin County inspector to schedule inspection of scratch , tanks , rock bed and final cover . 7 . Additionally , contractor must give the I . H . S . Engineer and Carla Dunkley , Project Manager , a minimum of 48 hour notice before starting the installation to schedule project site visits to see scratch , tanks and rock bed before covering . 8 . Contractor shall provide an As - Built System drawing for submission to MLBO . 9 . Contractor will not receive final payment until Aitkin County has completed a successful final inspection and issued a Certificate of Compliance ; any punch list items from the Owner or I . H . S . Engineer have been completed ; and Owner has been supplied with full lien waivers for all subcontractors and suppliers . 10 . Contractor is responsible for cutting vegetation and tree removal as required to install the system in accordance to MN Chapter 7080 . Contractor is responsible to cutting trees located within the mound foot print and immediately around the mound , as needed to access the area to construct said mound . Trees shall be cut flush with the ground . Any trees measuring 6 ” or more in diameter shall be cut into 8 ’ sections and hauled to the DNR shed located on Hwy 65 next to the D2 PowWow Grounds . Smaller trees or brush cleared can either be chipped or hauled away for offsite disposal

Minnesota

2026-04-29