400 Center Street Dock and Access Repairs

2026-11-03

The Town of Yarmouth is seeking written quotes for the 400 Center Street Dock and Access Repairs Project in accordance with M . G . L . c . 30 , § 39M . The work includes removal and reinstallation of a security gate , repair of the outer walkway , removal and replacement of offshore pilings , reinstallation of dock brackets , and repair of structural components . All materials shall be pressure - treated lumber and galvanized or stainless steel hardware . 1 . GENERAL REQUIREMENTS . 1 . Contractor shall verify all existing conditions prior to commencing work . 2 . All work shall be performed in a neat and workmanlike manner and in accordance with applicable codes and industry standards . 3 . Contractor shall coordinate with the Town regarding access , sequencing , and final layout of components ( including piling spacing and bracket placement ). 4 . Contractor shall be responsible for the proper disposal of all removed materials . 2 . SCOPE OF WORK . The Contractor shall furnish all labor , materials , equipment , and supervision necessary to complete the dock and access repairs at 400 Center Street , Yarmouth Port , MA , as described herein . Dimensions are approximate . The Contractor is responsible for verifying all existing conditions and measurements during the required site visit . All work shall be performed in accordance with applicable codes and industry standards . 2 . 1 Security Gate Removal and Reinstallation i . Remove and reinstall the existing steel security gate with surround ( approx . 7 ft x 8 ft ). ii . Gate and hardware shall be reused . iii . Gate panel and posts are a single unit and shall be handled accordingly . 2 . 2 Outer Walkway Repairs i . Remove , repair , and reinstall outer walkway ( approx . 4 ft x 8 ft ). ii . Contractor shall assume : a . Partial replacement of framing b . Reuse of most or all existing decking , where feasible iii . Replace deteriorated components as necessary to restore structural integrity . 2 . 3 Piling Removal and Installation i . Remove two ( 2 ) existing offshore pilings and associated dock brackets . ii . Furnish and install two ( 2 ) new timber pilings : a . Approx . 10 - inch diameter b . Approx . 12 feet in length c . Minimum 4 - foot embedment depth iii . Final spacing / alignment shall match dock bracket requirements and will be confirmed in the field with the Town . 2 . 4 Dock Bracket Reinstallation i . Reinstall existing dock brackets ( to be reused ) ii . Final width / spacing shall be as directed by the Town to accommodate float brackets . 2 . 5 Stringer Repairs i . Repair and / or replace damaged stringers . ii . Contractor shall assume partial replacement , including : a . Minimum of two ( 2 ) stringers b . Approximate size : 10 inches x 7 feet iii . Replace additional members as needed to ensure structural stability .

Massachusetts

2026-05-02