63885 Badger Rd , Hinckley IHS Septic

2026-11-03

Specifications include , but are not limited to : Contractor shall provide all equipment , materials and labor to complete the work described or referenced in this rfp , provided 2025 MLB Spec Book , MN Chapter 7080 , IHS Section 01270 and within the provided Environmental Systems design . 1 . Replace the on - site septic system per the approved septic design provided by Environmental Systems dated 7 / 21 / 23 , including box mound materials and details . Contractor shall ensure a complete and functional system . Note : this design was “ renewed ” by the designer on 10 / 24 / 25 per provided letter . 2 . Note : This is a Type III timed dosing box mound system . Please see the construction notes section of the design for instruction on mound construction . 3 . The contractor shall have the existing septic tank pumped and removed ( offsite disposal ). Contractor shall assume existing tank hold up to 2 , 500 gallons . Contractor shall complete tank abandonment form and submit a copy to the Project Coordinator . 4 . Contractor shall be responsible for obtaining a Pine County septic permit and coordinating required inspections . 5 . Contractor shall be responsible for contacting the Pine County inspector to schedule inspection of scratch , tanks , rock bed and final cover . 6 . Additionally , contractor must give the I . H . S . Engineer and Carla Dunkley , Project Manager , a minimum of 48 hour notice before starting the installation to schedule project site visits to see scratch , tanks and rock bed before covering . 7 . Contractor shall provide an As - Built System drawing for submission to MLBO . 8 . Contractor will not receive final payment until Pine County has completed a successful final inspection and issued a Certificate of Compliance ; any punch list items from the Owner or I . H . S . Engineer have been completed ; and Owner has been supplied with full lien waivers for all subcontractors and suppliers . 9 . Contractor is responsible for cutting vegetation and tree removal as required to install the system in accordance to MN Chapter 7080 . Contractor is responsible to cutting trees located within the mound foot print and immediately around the mound , as needed to access the area to construct said mound . Trees shall be cut flush with the ground . Any trees measuring 6 ” or more in diameter shall be cut into 8 ’ sections and hauled to the DNR shed located on Ojibwe Rd . Smaller trees or brush cleared can either be chipped or hauled away for offsite disposal . 10 . Contractor shall follow proper MN Chapter 7080 mound prep procedure , keeping traffic off the designated mound area . Contractor shall be responsible for the cost of any : compaction testing ; re - design fees ; or additional costs associated with system redesign or relocation ; if these expenses are incurred due to contractor or subcontractor damaging the mound location .

Minnesota

2026-05-02