95 Gallon Roll Out Container Annual Contract

2026-11-03

1 ) The container wall thickness of the body must not be less than 0 . 150 inches throughout the body of the container . 2 ) The minimum wall thickness of the critical wear points of the container shall be 0 . 110 inches and meet ANSI Z . 245 . 30 and Z . 245 . 60 3 ) The container shall have a minimum capacity of 95 gallons and shall be no more than 100 gallons . 4 ) The interior surface shall be smooth and free of pockets , recesses or intrusions which could trap debris or obstruct the discharge of refuse . 5 ) The unassembled resin weight of the container shall be no more than ( 31 ) thirty - one pounds and the assembled weight no more than ( 40 ) forty pound please specify . There shall be a minimum V2 " solid molded edge around the perimeter of the container bottom to protect the container against abrasions Add - on pads that require attention or replacement will not be acceptable . 6 ) The container shall be equipped with inserted lift bars . Integrally molded lift bars will not be acceptable . 7 ) The assembled container dimensions shall be as following . Specify : Overall Height max . of ( 45 ) forty - five inches Overall Width max . of ( 30 ) thirty inches Overall Length max . ( deep ) of ( 34 ) thirty - four inches Wheel Diameter shall be ( 10 ) ten inch plastic Cart shall be Code 2 100 % recyclable ...

Georgia

2026-04-29