AS - NEEDED HANDHELD LAW ENFORCEMENT ( LE ) SCANNER DEVICES

2026-11-03

2 . 1 . The handheld scanner device shall be able to image material through lead and 12 - gauge steel or the equivalent . 2 . 2 . The handheld scanner device shall weigh no more than approximately 3 . 7 kg ( 8 . 1 lbs .), including the fully integrated touch screen display and rechargeable battery pack . 2 . 3 . The unit shall be ergonomically balanced to allow for single - handed operation in confined areas such as motor vehicles interiors , or areas above head level or below the knee level . 2 . 4 . The handheld scanner device shall have a fully integrated , embedded , high - resolution transflective liquid crystal display built into the body of the device so that the unit operator can view the display and see object scans in real time while scanning . 2 . 5 . The only thing needed to be charged , or needing to maintain a charge , are the batteries to operate the one - piece , fully embedded screen unit . 2 . 6 . The handheld scanner device shall not require calibration to operate per specification . 2 . 7 . The handheld scanner device shall have a built - in digital color camera that provides a picture of the scan target with the scanned image . 2 . 8 . The handheld scanner device shall be able to take images at a scan speed of approximately 30 cm ( 12 ”) per second and will provide optimal imaging performance at a scan speed of approximately 15 cm ( 6 ”) per second . 2 . 9 . The handheld scanner device shall have dimensions no more than approximately 9 . 4 inches x 8 . 7 inches x 6 . 7 inches to facilitate operation in confined areas such as motor vehicle interiors , beneath motor vehicles and other confined areas . 2 . 10 . The handheld scanner device shall have an operating environment rating of Ingress Protection ( IP ) 54 for protection from dust ingress and from water spray from any direction . 2 . 11 . The handheld scanner device shall use a flexible , supported operating system that is fully integrated into the scanning unit , without the use of a separate control system unit . 2 . 12 . The handheld scanner device shall not use a proprietary software . 2 . 13 . The handheld scanner device shall use an application - based control software which can be updated and enhanced via an application link . 2 . 14 . The handheld scanner device shall be able withstand a temperature range of approximately - 4 ° F to 158 ° F . 2 . 15 . The handheld scanner device shall have a battery life of at least 4 hours at a 25 % duty cycle . 2 . 16 . The handheld scanner device shall have Bluetooth ™ and Wi - Fi wireless communications for data transfer and remote - operation capability . 2 . 17 . The handheld scanner device shall contain a complete set of imaging analysis tools including touch screen zoom , scrolling , image auto - enhancement , dynamic contrast , colorization , and ability to appending notes to images . 2 . 18 . The handheld scanner device shall be supported by off - line viewing station capability via desktop or tablet computer or smartphone . 2 . 19 . The handheld scanner device shall provide the image management capabilities to support mission reporting . Image management shall include image thumbnails , image searching capability , image exporting and image backups . 2 . 20 . The handheld scanner device will not require a separate , attachable / detachable use interface to generate or review images . 2 . 21 . The handheld scanner device shall adhere to American National Standards Institute / Health Physics Society ( ANSI / HPS ) N43 . 3 2008 and conforms to applicable ANSI , International Commission on Radiological Protection ( ICRP ), National Council on Radiation Protection and Measurements ( NCRP ) and European Atomic Energy Community ( Euratom ) radiation safety standards .

California

2026-05-10