Beech Water Storage Tank Rehab
Sector: Airport • Location: MITN, United States of America
Source: MITN Purchasing Group
It is the intent of these plans and specifications to provide for a contractor who shall provide all labor , materials , tools , and equipment necessary to perform exterior tank painting , interior tank spot repairs , and various other repairs on the Beech Avenue Water Storage Tank . 2 . SCOPE OF WORK Tank I
- Status
- Closed
- Sector
- Airport, Aerospace & Defense, Water Supply and Storage, Chemical (Industrial), Metal, Power Generation (CCGT), Steel, Manufacturing (Industrial), Commercial
- Location
- MITN, United States of America
- Updated
- 3 Nov 2026
- Source
- MITN Purchasing Group
ConstructChat
Ask ConstructChat about Beech Water Storage Tank Rehab
Pick a question to edit it, or write your own.
First answer free · no account
Tender Information FAQ
Tender Information
Participants
| Not available for this record. |
Status
Original status | closed |
Taiyo status | Closed |
Taiyo last update | 2026-11-03 |
Contact
| Not available for this record. |
Description
Description | It is the intent of these plans and specifications to provide for a contractor who shall provide all labor , materials , tools , and equipment necessary to perform exterior tank painting , interior tank spot repairs , and various other repairs on the Beech Avenue Water Storage Tank . 2 . SCOPE OF WORK Tank Information : The structure is a 2 , 500 , 000 - gallon composite tank with a low - water level of 69 ft . 6 in . located at 5392 Beech Ave . in Kalamazoo , Michigan . The work includes : Exterior : High pressure water clean ( 5 , 000 to 10 , 000 psi ) and spot power tool clean to a SSPC - SP11 standard . Apply a three ( 3 ) coat epoxy urethane system . Dry Interior : Abrasive blast clean the spot coating failures throughout to a SSPC - SP6 commercial standard . Apply a spot two ( 2 ) coat epoxy system to the prepared surfaces . Piping ( in the column base ): Abrasive blast clean to a SSPC - SP6 commercial standard . Apply a two ( 2 ) coat epoxy system . Modifications : 2 . 1 Install gaskets on the wet interior roof hatches . 2 . 2 Install handholds at the roof hatches ( inside the roof handrail ). 2 . 3 Install a chemical feed tap on the fill / draw pipe . 2 . 4 Replace the expansion joint nuts and bolts . 2 . 5 Install an aluminum jacketing over the fill / draw pipe insulation . 2 . 6 Install a fall prevention device on the dry interior and wet interior ladders . 2 . 7 Replace the aviation light . 2 . 8 Replace the dry interior light bulbs . |
Location
Country | United States of America (USA) |
State | MITN |
Source
Source | MITN Purchasing Group |
URL |
More Details
Record type | Tender |
Sector | Airport, Aerospace & Defense, Water Supply and Storage, Chemical (Industrial), Metal, Power Generation (CCGT), Steel, Manufacturing (Industrial), Commercial |
Article published date | 2026-04-29 |
Research
Free account
View all details
You are reading the public part. A free account opens the rest:
- Every detail on this tender
- News and media coverage
- Technical research
Free account · no card · lands you back on this tender
