Boat Launch Dock Refurbishment

2026-11-03

For each skid dock , Contractor shall : 2 . 2 . 1 Remove the skid dock from its site as a whole or in parts . 2 . 2 . 2 After taking careful note of each skid dock ’ s dimensions and construction , dismantle and properly dispose of all wooden skid dock parts leaving just the metal frame components . 2 . 2 . 3 Clean the steel frame components with appropriate tools and methods to remove all adhered scum , scale , grease , rust , and any other loose foreign materials from the metal to render the entire metal surface re - paintable with Rust Bullet Paint . 2 . 2 . 4 Carefully inspect the frame components for cracks or other damage and make repair welds or otherwise repair as necessary . 2 . 2 . 5 Once the structural integrity of the frame components is restored , prepare the metal surface for painting and paint the frame components with two coats of black Rust Bullet Paint according to manufacturer ’ s specifications . 2 . 2 . 6 Rebuild the skid docks to match the original construction using new Pressure Treated Critical Structure wood and new marine - grade type 316 or 304 stainless steel hardware with : 2 . 2 . 6 . 1 2x8 Deck Boards 2 . 2 . 6 . 2 4x4 Horizontal Timbers 2 . 2 . 6 . 3 6x6 Vertical Post Timbers 2 . 2 . 7 Return each repaired and refurbished skid dock to its original site .

MITN

2026-04-29