Bsp Region 2 Universal Access Picnic Table Kits

2026-11-03

The following requirements shall be met within the performance of this contract . • Supplier to supply and deliver fifty - five ( 55 ) universal access , galvanized steel tube picnic table kits , metal table leg structure , all mounting hardware and lumber . Leg tubing must be at least 2 inches OD . ADA access must be located at each end of the table , and each side bench legs must be able to accommodate eight ( 8 ) foot benches . Table specifications shall be as follows : o Height : Tabletop 29 ” Nominal ; Seat 17 ” Nominal o Width : Tabletop 30 ” Nominal ; Seat 12 ” Nominal o All lumber for tabletops and benches must be treated pine boards o Total of 495 boards measuring 2x6x8 ( 275 / tabletop , 220 / benches ) o Wheelchair accessibility at both ends . o Seats are the same length as the tabletop , thus a benefit over the extended top design . o Meets or exceeds current ADAAG , FSORAG , & FSTAG guidelines for wheelchair access to picnic tables . o The one - piece welded construction frames are fabricated using continuous MIG welds for strength . o All pipe and tubing conform to ASTM A513 - 94 , and all steel components conform to ASTM - A1011 . o All cross braces are 1 " Schedule 40 pipe (. 133 " thick wall ) or better . o Center brackets are all 1 / 8 " thick ( 12 gauge ) steel . o Table and seat brackets are 3 / 16 " thick ( 7 gauge ) steel for 2 " Schedule 40 frames . o Support brackets are 1 / 8 " thick ( 12 gauge ) steel .

Pennsylvania

2026-05-09