Burns Park Junior Tennis Junior Courts Improvement Project

2026-11-03

6 . 1 Remove and store the existing perimeter chain link fence fabric for reinstallation . 6 . 2 Remove and store any perimeter chain link fence connecting hardware necessary to facilitate forming and placement of concrete for the new playing surface . 6 . 3 Remove and dispose the existing interior chain link fence , posts , nets , and all associated hardware . The new surface will remain completely open to accommodate multiple uses . 6 . 4 . All holes created by the removal of existing net posts shall be filled with non - shrink grout to match the existing surface elevation . 6 . 5 Install a 10 - mil vapor barrier over the entire existing surface , including proper tape at all seams . The vapor barrier is intended to create a surface tension break and prevent existing cracks from telegraphing into the new concrete surface . 6 . 6 Install # 4 reinforcing steel ( rebar ) on 12 - inch centers over the entire surface . Rebar shall be supported on 3 - inch rebar chains . 6 . 7 Form the entire perimeter of the existing slab using the chain link fence posts as a guide . No forms shall be screwed into or mechanically attached to the existing posts . 6 . 8 Place 5 inches of 3 , 500 PSI concrete over the entire existing surface . The concrete shall be machine troweled with a light broom finish . All concrete shall be placed in a single continuous placement ; multiple placements will NOT be permitted .  Approximate total area : 22 , 600 square feet 6 . 9 Saw cut control joints using an early - entry saw at the earliest time the concrete can support cutting without damage . Control joint layout will be based on final court configuration ( TBD ). Maximum panel size shall not exceed 17 feet by 17 feet unless otherwise approved by the supervising engineer . 6 . 10 Reinstall the stored perimeter chain link fence and all associated hardware .

Arkansas

2026-05-13