logo

Campus Sidewalk Pressure Washing - Price Agreement

The scope, dates and status of this tender. A free account opens every field.

Source: Idaho Purchasing Group

Tender
Closed

1 . Specifications : Boise State University seeks to establish a campuswide Price Agreement for commercial pressure washing services limited to pedestrian surfaces . The resulting Agreement will establish fully burdened unit pricing for use by all University departments for routine and as - needed cleaning of sidewalk

Status
Closed
Sector
Oil and Gas, Chemical (Industrial), Education, Water Supply and Storage, Manufacturing (Industrial), Car parking, Commercial, Tunnel, Automotive
Location
Idaho, United States of America
Updated
3 Nov 2026
Source
Idaho Purchasing Group

ConstructChat

Ask ConstructChat about Campus Sidewalk Pressure Washing - Price Agreement

Pick a question to edit it, or write your own.

First answer free · no account

I am a

Tender Information FAQ

Tender Information

3 Q
The tender “Campus Sidewalk Pressure Washing - Price Agreement” is a tender record in Taiyo, linked to the Oil and Gas sector. It is issued for works, goods, or services related to Idaho, United States of America.

Participants

Not available for this record.

Status

Original status

closed

Taiyo status

Closed

Taiyo last update

2026-11-03

Contact

Not available for this record.

Description

Description

1 . Specifications : Boise State University seeks to establish a campuswide Price Agreement for commercial pressure washing services limited to pedestrian surfaces . The resulting Agreement will establish fully burdened unit pricing for use by all University departments for routine and as - needed cleaning of sidewalks , plazas , and similar horizontal exterior walking surfaces at University - owned or University - operated locations . This Price Agreement is administered by Facilities Operations and Maintenance ( FOM ). All service requests shall be coordinated through Facilities in accordance with University procedures . No minimum volume of work is guaranteed or implied under this RFQ . Services outside the scope described herein , including pressure washing of building exteriors or vertical surfaces , are not authorized under this Agreement and must be separately scoped and approved through Campus Planning & Facilities prior to performance . ● All pedestrian surfaces must be pressure washed with water at least 180 degrees Fahrenheit . ● Contractor must have ownership of commercial grade equipment . ● Pressure washer engine must be equipped with sufficient exhaust noise suppression to produce no more than 85 db at a distance of 10 feet from the pressure washer . ● Pressure washing system must be equipped with a vacuum operated wash water reclaim / recycle system capable of point - of - wash recovery when using a vacuum equipment rotary flat surface cleaner . Recovery rate of wash water shall be no less than 95 %. ● Reclaim system shall be equipped with an oil / water separator that processes wash water to no more than 100 parts per million ( ppm ) when processed . ● In recycle mode , the system must be capable of reducing water consumption by at least 90 %. ● No wash water discharge into storm drains , landscaped areas , or campus grounds will be permitted . ● All wash water management strategies shall be submitted to the Environmental Safety Specialist for approval prior to starting work in any area . ● Contractor will take all reasonable steps and precautions to avoid creating any environmental hazards associated with pressure washing on campus . ● Contractor shall comply with Attachment 1 – Campus Pressure Washing Access and Tunnel Restriction Map and all vehicle and access limitations shown therein . ● Contractor shall use equipment and transport vehicles suitable for restricted - weight pedestrian zones . ● Contractor shall take all necessary precautions to ensure the safety of Boise State University employees , staff , students , and the public , and to ensure preservation of facilities and infrastructure . ● The Contractor shall display warning signs in all areas where pressure washing operations may cause traffic obstruction or personnel hazard . ● The Contractor shall be responsible for all damage to sidewalks or surrounding areas directly caused by equipment , application methods , chemical use , or contractor personnel during the pressure washing process . Any items damaged during pressure washing shall be repaired or replaced to the satisfaction of Boise State University at the contractor ' s expense . ● The majority of the work will typically occur between April 1 and August 31 ; however , services may be requested year - round as needed . ● Contractor shall adhere to all OSHA safety guidelines . ● The contractor shall not enter into any subcontracts for any services described herein without obtaining prior written approval from the Boise State University Procurement Department .

Location

Country

United States of America (USA)

State

Idaho

Source

Source

Idaho Purchasing Group

URL

More Details

Record type

Tender

Sector

Oil and Gas, Chemical (Industrial), Education, Water Supply and Storage, Manufacturing (Industrial), Car parking, Commercial, Tunnel, Automotive

Article published date

2026-05-06

More on this tender

Research

Free account

View all details

You are reading the public part. A free account opens the rest:

  • Every detail on this tender
  • News and media coverage
  • Technical research
View all details

Free account · no card · lands you back on this tender