Chip Seal Highway 200 - Missoula Area

2026-11-03

Department of Transportation is seeking bids for the Chip seal of P - 24 Hwy 200 and S - 210 Hwy 210 . Contractor shall provide all labor , equipment , materials , incidentals and traffic control necessary to produce , haul , place , roll and broom approximately 79 , 880 square yards of laid - in - place chip seal . The chip seal will be approximately 1 . 0 miles long and 45 feet wide . Contractor shall provide CHFRS - 2P asphalt emulsion & Type 1 chips . Traffic control with pilot cars must be maintained until dusk or fading light each work day as determined by the Project Manager . Contractor must provide enough pilot cars to keep traffic stops to a maximum of 15 minutes . The emulsion application rate for chip seals is estimated at . 42 gallons per square yard . The cover material application rate is estimated at 25 pounds per square yard . Actual application rates will be based on the chip design and the actual field adjustments . If the cover material application rate of 25 pounds per square yard is not sufficient to provide a quality job , the Project Managers will jointly determine what the new application rate should be . Contractor must furnish a water truck for dust control and wetting of chips . Arrangements must be made by the Contractor for acquiring water for wetting and sweeping . It will be the responsibility of the Contractor to determine the centerline and place reflective tabs prior to the chip seal . The Department will provide final striping .

Montana

2026-04-29