CNG STATION SITE DEMOLITION & ABATEMENT

2026-11-03

The project includes complete removal of 154 , 731 sq ft of all above - grade and below - grade structures and appurtenances , except for the existing building pad , which shall remain intact . 2 . 0 General Demolition Requirements The Contractor shall furnish all labor , materials , equipment , supervision , permits , and incidentals necessary to perform the work , including but not limited to : • Demolition of all existing buildings and structures within the defined project limits • Removal of structural components including : o Roof systems o Exterior and interior walls o Floors ( excluding building pad ) o Canopies , awnings , and overhangs • Demolition of all mechanical , electrical , and plumbing systems serving the structures • Removal of debris and disposal at licensed facilities • Removal of Times Square Sign in its entirety 3 . 0 Hazardous Materials Abatement Where identified in the contract documents : • Perform abatement of asbestos - containing materials ( ACM ), lead - based paint , and other regulated materials in accordance with : o EPA regulations o OSHA standards o Alabama Department of Environmental Management ( ADEM ) requirements • Provide proper notifications , air monitoring , clearance testing , and disposal documentation • Abatement shall be completed prior to structural demolition , unless otherwise permitted by regulation 4 . 0 Site Utilities & Disconnections The Contractor shall : • Coordinate with utility providers to locate , disconnect , cap , and secure all utilities , including : o Electrical o Gas o Water o Sewer o Communications • Protect any utilities designated to remain in service • Provide verification of disconnections prior to demolition 5 . 0 Below - Grade Work • Remove foundations , footings , and underground structures to the extent indicated in the drawings • Demolish slabs , curbs , and pavements as shown • Building pad shall not be demolished or disturbed • Backfill voids with approved material and compact to specified density 6 . 0 Environmental & Safety Controls The Contractor shall implement and maintain : • Dust control measures • Erosion and sediment control • Noise mitigation • Site security and fencing • OSHA - compliant safety plans • Traffic control as required 7 . 0 Salvage & Recycling • Salvage or recycle materials where feasible in accordance with project requirements • Remove and legally dispose of all non - salvageable materials • No on - site burial of debris is permitted 8 . 0 Site Restoration Upon completion of demolition : • Grade the site to promote positive drainage • Remove temporary facilities and controls • Leave the site in a clean , stable , and safe condition • The building pad shall be left undamaged and ready for future development 9 . 0 Schedule & Coordination • Contractor shall complete work within the contract time specified as 90 Calendar Days . • Coordinate work with BJCTA representatives • Provide a demolition schedule prior to commencement 10 . 0 Drawings & Specifications All work shall be performed in accordance with : • This Scope of Work • Technical specifications • Demolition drawings • Environmental reports ( if applicable ) In the event of a conflict , the more stringent requirement shall govern . 11 . 0 Exclusions ( Very Important ) The following items are explicitly excluded unless otherwise noted : • Demolition or removal of the existing building pad • New construction • Utility upgrades beyond disconnection and capping

Alabama

2026-05-10