CONVERSE COUNTY SHOOTING RANGE IMPROVEMENTS PROJECT

2026-11-03

The Project generally consists of 1 ) lower and upper range improvements , including all firing and rimfire ranges , demolition / installation of new steel firing range structures and shelters , and a vault restroom ; 2 ) fencing and gate improvements / replacement ; 3 ) trap club improvements ; and 4 ) ADA accessibility , including removal and replacement of concrete . 1 . General Project Description The Converse County Shooting Range Improvement Project consists of demolition , earthwork , site improvements , concrete construction , fabrication and installation of range structures , safety improvements , target systems , electrical distribution , surveillance infrastructure , fencing , gates , and associated site improvements at the Converse County Public Shooting Range . All work shall be performed in accordance with applicable federal , state , and local regulations and in compliance with Converse County requirements . The Contractor shall furnish all labor , supervision , materials , equipment , tools , transportation , permits , inspections , and incidentals necessary to complete the project as described herein . All work shall be performed in a safe , professional , and workmanlike manner consistent with industry standards . 2 . Contractor Responsibilities The Contractor shall : • Obtain and pay for all required permits , inspections , licenses , and approvals required for construction . • Maintain all required contractor licensing within the State of Wyoming . • Provide performance and payment bonds if required by the County procurement process . • Maintain required general liability , workers compensation , and vehicle insurance coverage . • Coordinate with Converse County representatives for construction scheduling and range closures . • Provide shop drawings , product data , and material submittals for review and approval prior to installation . • Protect existing facilities and infrastructure during construction . • Provide site cleanup and proper disposal of all demolition debris . • Maintain site safety in accordance with OSHA regulations . All work shall comply with applicable codes including but not limited to : • International Building Code ( IBC ) • International Fire Code ( IFC ) • National Electrical Code ( NEC ) • Americans with Disabilities Act ( ADA ) • Wyoming Department of Environmental Quality requirements 3 . Concrete Specifications Unless otherwise noted , all cast - in - place concrete shall meet the following minimum requirements : • Minimum compressive strength : 4 , 500 PSI at 28 days • Air entrainment suitable for freeze - thaw environments • Reinforcement : # 3 rebar minimum at 18 " O . C . each way , or approved fiberglass reinforcement equivalent • Base preparation : minimum 4 " compacted granular base course over properly compacted subgrade • Concrete finish : broom finish for exterior walking surfaces and firing line pads • Expansion joints installed per industry standards • Concrete curing procedures per ACI standards

Rocky Mountain E-Purchasing System

2026-05-06